168-1359 Caterpillar Penetration Tip Teeth

168-1359 Caterpillar Penetration Tip Teeth

168-1359 Caterpillar Penetration Tip Teeth

Query price CA1681359 168-1359 1681359 TIP-PENETRATION Caterpillar 315D L, 316E L, 318C, 318D2 L, 320C, 320D, 320D GC, 320D LRR, 320D RR, 320D2, 321D LCR, …
168-1359 Caterpillar style Rock Penetrator Plus Bucket Tooth J350, Mining Construction and Dredging Sectors Caterpillar Shovel Teeth, CAT320.
Back · Home · Ground Engaging Tools · Bucket GET · Tips · J Series (side pin) · Penetration Plus · 168-1359: Penetration Plus Tip.
SKU: 168-1359; Weight: 13.45 LBS; Make: CATERPILLAR; Series: J SERIES; Sub-Series: J350 SERIES; Product Type: Teeth. Current Stock: Quantity:.
Cat J350 Penetration Plus Tip 168-1359. … Part Number: 168-1359. Model: Cat 320. Family: J350. Shape: Penetration Plus. Weight: 8.5kg. Hardness: 48-52HRC.
Penetration Plus tips offer a low-profile shape that provides optimal sharpness, penetration and digging ability throughout tip life. In addition, these genuine …
Part Number:1U3352 1U-3352 1U3202 1U3252 1U3302 1U3452 1681359 168-1359 1140358 1140359 1199359 9N4353 9N4352 9W2358 1359352 1681350 1359357 9J4359 9J2358 1U3351 1681351 1073350 || Compatible Models :Caterpillar J350 Series 225B 229 245 318B 318B N 318C 320B 320B L​ || Width: 3.2 – Inside Width of Tooth Pocket: 2.2 || The Cat Bucket Teeth are Made of Superior Alloy Steel and More Usable Wear Metal || We Provide 100% Perfect Customer Service, If There is Any Question, Please Contact us
Compatible equipment models: 1681359:
EXCAVATOR 315D L 316E L 318C 318D2 L 320C 320D 320D GC 320D LRR 320D RR 320D2 321D LCR 322B L 322C 323D L 323D2 L 324D 324D L 325B L 325C Caterpillar
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7241 Valve Spring Compressor 1
B 441-0714 Tool As 1 Start By:
Remove the electronic unit injectors.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Place the piston at the top of the compression stroke (TC). Remove the valve springs for that cylinder. If the valves fall into the cylinder liner, then the cylinder head must be removed.
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, “Finding Top Center Position for No. 1 Piston”.
Illustration 1 g01073852
Illustration 2 g01043625
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) in the electronic unit injector sleeve. Secure Tooling (A) with unit injector clamp (1).
Tighten the full nut until valve spring keepers (3) are loose on valve (2).
Remove valve spring keepers (3) from the valve.
Carefully remove Tooling (A).
Remove valve rotator (4).
Remove outer valve spring (6) and inner valve spring (5) from the valve.
Remove washer (7) from the valve guide.
Use Tooling (B) to check the valve springs (spring force). Refer to Specifications, “Cylinder Head Valves” for additional information on the valve springs.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-7241 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the valve stems with clean engine oil.
Illustration 3 g01043625
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Ensure that washer (7) is installed on the valve guide.
Install inner valve spring (5) and outer valve spring (6) on valve (2).
Install valve rotator (4) on valve (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Use Tooling (A) to compress inner valve spring (5) and outer valve spring (6). Install valve spring keepers (3) on valve (2). Remove unit injector clamp (1) and Tooling (A).End By:
Install the electronic unit injectors.

1073350 J350 FLARE TOOTH
1073450 FLARE TOOTH  VOE 14531282 65SNE Volvo Digger Flared Tooth
1073550 TOOTH, FLARE
1099200 CATERPILLAR STYLE J200 FLARE TOOTH
1167459 CATERPILLAR J450/J460 1167459 HEAVY-DUTY CARBIDE PENETRATIONTOOTH
126925A1 HENLEY STYLE TWIN TIGER TOOTH
135-8203 UNITOOTH 428,426,416  Volvo Flare Tooth EC210 EC240 Excavator 30SNE VOE14530841
135-9300 J300 TOOTH
135-9357 TWIN TIGER LONG J350
135-9400 J400 HD PENETRATION TOOTH
135-9600 J600 HD PENETRATION TOOTH
138-6451 J450 TOOTH HD
138-6552 J550 TOOTH HD   80TPE VOE14531655 Volvo Tractor Twin Pick Tip
141-78-11253 TOOTH
1U3202WTL CATERPILLAR STYLE TWIN TIGER TOOTH
1U3209 PENETRATION TOOTH
1U3251 920/941/953 SHORT TIP
1U3252RC ROCK CHISEL TOOTH
1U3252WTL TIP – DOUBLE POINT   40TPE Volvo ECR305C Bucket Two Pick Tooth
1U3301 950/955/966,215 SHORT TIP
205-70-19570 PC200 TOOTH
207-70-14151 TOOTH PC220
207-70-14151WT TWIN TIGER TOOTH
2085254 FLARE TOOTH
208-70-14152 PC400 TIP  Volvo Samsung Wide Bucket Teeth VOE14531282, 65SNE
20T-70-13130 PC30/40/45 TOOTH
20X-70-14160 TOOTH
20Y-70-14180 PLATE
21SYL 21 – HELILOK TIP
2209089 2209089 GENERAL PURPOSE CAT-STYLE K-SERIES BUCKET TOOTH
22R10 RIPPER TOOTH   30SNE Volvo Spade Nose Teeth for Levelling Cleaning Grading Backfiling
22S TOOTH, SHARP
2300FL 2300FL ADAPTER FOR 230/23 SERIES CASE STYLE BACKHOE TOOTH
23F HENSLEY STYLE 23 SERIES FLARED TOOTH
23TL 23 SERIES TIGER POINT LONG
23WTL 23 SERIES LONG TWIN TIGER TIP
25R12 RIPPER TOOTH
25S SHARP TOOTH
25TVIP TWIN TIGER POINT
25VIP TIGER POINT
27S6F HELILOK FLARE TIP
27SYL 27 – HELILOK TIP
27TVIP 27 – HELILOK TWIN TIGER TIP
27VIP 27 – HELILOK TIGER TIP
295 HENSLEY STYLE STANDARD PARABOLIC BUCKET TOOTH
295T HENSLEY STYLE 295T TIGER TOOTH
295WT HENSLEY STYLE 295WT TWIN TIGER TOOTH
29VY TIP SINGLE TIGER TOOTH
2D5572 GRADER SCARIFIER TIP
2K4501 BUSHING
30S SHARP TOOTH
30VIP TOOTH, TIGER
33TVY TIP TWIN TIGER TOOTH
33VY TIGER TOOTH
35S SHARP TOOTH
35S6F CONICAL FLARED TOOTH
35VIP TOOTH, TIGER
37SYL 37 – HELILOK TIP
37TVIP 37 – HELILOK TWIN TIGER TIP
37VIP 37 – HELILOK TIGER TIP
40S TOOTH, SHARP

error: Content is protected !!