1U3202-F CAT J200 Digger Long Bucket Teeth Side Pin 8E6208 8E6209 Retainer
Set of 10 – 1U3202 Bucket Teeth Side Pin 8E6208 Retainer CAT J200 Digger Long
– OEM Quality – Heat treated and tempered steel – Includes 10 teeth, pins, and retainers
– High hardness – Tooth Part #: 1U3202 – Pin Part #: 8E6208
– Retainer Part#: 8E6209 – Length: 5.8″
– Width: 2.4″ – Inside Width of Tooth Pocket: 1.6″
– Pin dimensions: 2.35″ x .44″ – Weight: 28 lbs
Manufacturer Part Number
(10)1U3202+(10)8E6208+(10)8E6209
Model
(10)1U3202+(10)8E6208+(10)8E6209
Other Parts Available: Puncture, Tensioner, Upper Roller, Track Roller, Track Link Assembly, Shoe Track, Track Bolt & Nut, Spring, Track Adjusting Cylinder, Pin Hub, Hub, Hub Teeth, Bushing , etc
Other tooth numbers available: 1U3202 1U3252 1U3302 1U3352 1U3452 1U3552 6Y3222 6Y6335 7T3402
980G, H, F, C. 1.25”. 6I8243/44. Corner RH/LH. 77.9 lbs. 1.75”. J400. 980G, F. 1.25”. 1U1357. Center. 43.7 lbs. 1.75”. J350. 980C, F, 977, 973C.
Dec 1, 2021 — – OEM Quality – Heat treated and tempered steel – Includes 5 teeth, pins, and retainers · – High hardness – Tooth Part #: 1U3202 – Pin Part #: …
Looking to save money by buying TIP-LONG 1U3202 online? CTP store offers great quality heavy equipment parts at an … F-720-056 Rev. E Tips and Adapters …
Find many great new & used options and get the best deals for 1U3202 Cat Style J200 Bucket Teeth (5 Pack) + Pins & Retainers by H&L Tooth Co. at the best …
Bucket Teeth. Material, Alloy steel, Part No. 53103205. Color, Yellow or Customer’s Request, N.W., 2.15 kgs. Logo, Yassian or Customer’s Request, Packing …
J200, 1U3202, 416, 426, 428, 436, 438, (Also D3/931 backhoe att.) … 320A, B, 944, 950, 950B, 950E, F;960F, G, 962G, 996, 996C, 953, 953B, C;955L, 963, 963B …
SARL Maxima Dent système CAT428 / J200 / 1U3202 / 64212 [1U-3302] – Dent à claveter système CAT 428 / J200 / 1U3202 / 64212, sur support soudé au godet.
Required Tools
Tool Part Number Part Description Qty
A 9U-7241 Valve Spring Compressor 1
B 441-0714 Tool As 1 Start By:
Remove the electronic unit injectors.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Place the piston at the top of the compression stroke (TC). Remove the valve springs for that cylinder. If the valves fall into the cylinder liner, then the cylinder head must be removed.
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, “Finding Top Center Position for No. 1 Piston”.
Illustration 1 g01073852
Illustration 2 g01043625
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) in the electronic unit injector sleeve. Secure Tooling (A) with unit injector clamp (1).
Tighten the full nut until valve spring keepers (3) are loose on valve (2).
Remove valve spring keepers (3) from the valve.
Carefully remove Tooling (A).
Remove valve rotator (4).
Remove outer valve spring (6) and inner valve spring (5) from the valve.
Remove washer (7) from the valve guide.
Use Tooling (B) to check the valve springs (spring force). Refer to Specifications, “Cylinder Head Valves” for additional information on the valve springs.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-7241 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the valve stems with clean engine oil.
Illustration 3 g01043625
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Ensure that washer (7) is installed on the valve guide.
Install inner valve spring (5) and outer valve spring (6) on valve (2).
Install valve rotator (4) on valve (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Use Tooling (A) to compress inner valve spring (5) and outer valve spring (6). Install valve spring keepers (3) on valve (2). Remove unit injector clamp (1) and Tooling (A).End By:
Install the electronic unit injectors.
1073350 J350 FLARE TOOTH
1073450 FLARE TOOTH VOE 14531282 65SNE Volvo Digger Flared Tooth
1073550 TOOTH, FLARE
1099200 CATERPILLAR STYLE J200 FLARE TOOTH
1167459 CATERPILLAR J450/J460 1167459 HEAVY-DUTY CARBIDE PENETRATIONTOOTH
126925A1 HENLEY STYLE TWIN TIGER TOOTH
135-8203 UNITOOTH 428,426,416 Volvo Flare Tooth EC210 EC240 Excavator 30SNE VOE14530841
135-9300 J300 TOOTH
135-9357 TWIN TIGER LONG J350
135-9400 J400 HD PENETRATION TOOTH
135-9600 J600 HD PENETRATION TOOTH
138-6451 J450 TOOTH HD
138-6552 J550 TOOTH HD 80TPE VOE14531655 Volvo Tractor Twin Pick Tip
141-78-11253 TOOTH
1U3202WTL CATERPILLAR STYLE TWIN TIGER TOOTH
1U3209 PENETRATION TOOTH
1U3251 920/941/953 SHORT TIP
1U3252RC ROCK CHISEL TOOTH
1U3252WTL TIP – DOUBLE POINT 40TPE Volvo ECR305C Bucket Two Pick Tooth
1U3301 950/955/966,215 SHORT TIP
205-70-19570 PC200 TOOTH
207-70-14151 TOOTH PC220
207-70-14151WT TWIN TIGER TOOTH
2085254 FLARE TOOTH
208-70-14152 PC400 TIP Volvo Samsung Wide Bucket Teeth VOE14531282, 65SNE
20T-70-13130 PC30/40/45 TOOTH
20X-70-14160 TOOTH
20Y-70-14180 PLATE
21SYL 21 – HELILOK TIP
2209089 2209089 GENERAL PURPOSE CAT-STYLE K-SERIES BUCKET TOOTH
22R10 RIPPER TOOTH 30SNE Volvo Spade Nose Teeth for Levelling Cleaning Grading Backfiling
22S TOOTH, SHARP
2300FL 2300FL ADAPTER FOR 230/23 SERIES CASE STYLE BACKHOE TOOTH
23F HENSLEY STYLE 23 SERIES FLARED TOOTH
23TL 23 SERIES TIGER POINT LONG
23WTL 23 SERIES LONG TWIN TIGER TIP
25R12 RIPPER TOOTH
25S SHARP TOOTH
25TVIP TWIN TIGER POINT
25VIP TIGER POINT
27S6F HELILOK FLARE TIP
27SYL 27 – HELILOK TIP
27TVIP 27 – HELILOK TWIN TIGER TIP
27VIP 27 – HELILOK TIGER TIP
295 HENSLEY STYLE STANDARD PARABOLIC BUCKET TOOTH
295T HENSLEY STYLE 295T TIGER TOOTH
295WT HENSLEY STYLE 295WT TWIN TIGER TOOTH
29VY TIP SINGLE TIGER TOOTH
2D5572 GRADER SCARIFIER TIP
2K4501 BUSHING
30S SHARP TOOTH
30VIP TOOTH, TIGER
33TVY TIP TWIN TIGER TOOTH
33VY TIGER TOOTH
35S SHARP TOOTH
35S6F CONICAL FLARED TOOTH
35VIP TOOTH, TIGER
37SYL 37 – HELILOK TIP
37TVIP 37 – HELILOK TWIN TIGER TIP
37VIP 37 – HELILOK TIGER TIP
40S TOOTH, SHARP