Bolt-On Bucket Teeth
Digger & Excavator Bucket Teeth
Good, sharp bucket teeth are essential for ground penetration, enabling your excavator to dig with the least possible effort, and hence the best efficiency. Using blunt teeth greatly increases the percussive shock transmitted through the bucket to the digging arm, and hence also to the slew ring and undercarriage, as well as ultimately using more fuel per cubic metre of earth shifted.
All the bolt-on teeth in our range are in stock in our warehouse, and are supplied complete with nuts and bolts as necessary.
When ordering teeth and/or side cutters, you MUST check and specify dimensions ‘A’ bolt centres, and ‘B’ cutting edge gap, in order to ensure you receive the correct parts.
Wear parts /Bolt-On Teeth
Mini 1 Leg Bolt-on Tooth (Forged), 40mm centres
Bolt-on Tooth 16mm edge, 40-45mm bolt centres
Bolt-on, 2-leg style Tooth 16mm edge, 55mm centres
Bolt-on, Side Cutter Tooth 16mm edge, 55mm centres
GW1 Forged Weld-on Side Cutters
JCB 3CX style Bolt-on, 2-leg style Tooth, 20mm edge, 45mm centres
JCB 3CX style Bolt-on, Side Cutter Tooth 20mm edge, 45mm centres
Bolt-on, 2-leg style Tooth 25mm edge, 53mm centres
Bolt-on, Side Cutter Tooth 25mm edge, 53mm centres
Shop our range of bolt-on teeth and side cutter/corner teeth on line.
If the effort of burning off old bolts, and bolting on new teeth seems too much, you could always convert to our Caterpillar style replaceable tip type teeth. Once the adapter is welded onto the cutting edge, you can swap or replace tips quickly and easily.