Bucket Cutting Edge Steel

Bucket Cutting Edge Steel

Bucket Cutting Edge Steel – EXTEND THE LIFETIME OF YOUR BUCKET

If you want to repair or strengthen your bucket, NBSJ Wear Parts bucket steel is the perfect solution. We offer cutting edges profiles, bolt on edges, wear strips and grouser bars hardened to 400 or 500 HB in cut to length size. The fact that it is hardened and made of boron alloyed steel improves its strength significantly and extends the lifetime of your bucket. The steel is of Swedish origin and all bevelling, cutting and drilling is made before hardening in order to achieve a consistent high quality product.

All buckets are shaped differently, but you do not have to worry about the steel not fitting your specific bucket. Our bucket steel has excellent weldability and comes in a lot of different finishes in order to suit most buckets on the market. All products are manufactured in Sweden.

No matter where you are, we are always close.

BOLT ON EDGES (500HB) DRILLED 1″ (BOTH SIDES BEVELLED)
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out.

BOLT ON EDGES (500HB) DRILLED 3/4″
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out.

BOLT ON EDGES (500HB) UNDRILLED
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out. Bucket Cutting Edge Steel

CUTTING EDGES (400HB)
Cutting Edges are used in the front of loader and excavator buckets. Standard sizes available in thicknesses from 12-60 mm, widths of 100-500 mm and in the most usable cut to length size. Bucket Cutting Edge Steel

CUTTING EDGES (500HB)
Cutting Edges are used in the front of loader and excavator buckets. Standard sizes available in thicknesses from 12-60 mm, widths of 100-500 mm and in the most usable cut to length size.

GROUSER BARS (500HB)
Grouser bars are used in the screening and crushing production as grid bars. They can also be used when repairing track shoes on crawler excavators. Grouser bars are available in height 24-75 mm and width of 16-45 mm in most suitable cut to length size.

PROFILES (500HB)
Profiled cutting edges are used for added protection of the base edge. They can either be bolted or welded on. The half arrow edges can also be used as side cutters. Half arrow edges are available in thickness from 11 to 40 mm and a width from 101 to 254 mm. Bucket Cutting Edge Steel

WEAR BARS (500HB)
Wear bars are used in a number of applications. They are used on buckets to increase strength and life time of the bucket. The standard range is available in thicknesses from 10-30 mm, widths from 80-200 mm in most suitable cut to length size.

High Carbon-Manganese Steel Advanced Weld Bucket Edge

Caterpillar Heavy Duty J450 Penetration Tip 9W8452PT 9W-8452PT

Excavator Digging Half Arrow Bucket Cutting Blades

High Strength Bucket Cutting Edge for Excavator

16Mn Carbon-manganese Steel Digger Bucket Cutting Edge

HEAT-TREATED WELDED HALF ARROW PROFILE CUTTING EDGE

Welded Half Arrow Blade Bucket Cutting Edge

Weld-On Excavator Bucket Base Edges

Hardened Carbon Steel Unpainted Excavator Attachments Bucket Weld-On Cutting Edge

error: Our Bucket Teeth & Adapters Content is protected !