BUCKET TEETH & ADAPTERS

BUCKET TEETH & ADAPTERS

BUCKET TEETH & ADAPTERS STARMET SYSTEM

CATERPILLAR

DOOSAN

ESCO

HYUNDAI

KOMATSU

Available for Loaders and Excavators up to 400 tonnes

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

INNOVATIVE HAMMERLESS TOOTH SYSTEM FOR MINING,

QUARRY AND HEAVY DUTY CONSTRUCTION APPLICATIONS

Increasing your productivity and safety is our business too!!

Ultimate Safety:

The hammerless twist pin mechanism requires no hammering action to install the pins, greatly reducing the risk of flying metal and accidents. The pins are simply pushed into place by hand and turned 90 degrees with a

tool to securely fasten them.

No Loss of Teeth:

The hammerless locking system uses the twist pin and an elastomet retainer that has excellent retention. This ensures teeth never come loose or fall off. Through out the history of this STARMET system worldwide, there have been no reports of loosing teeth.

Longer Service Life:

All teeth styles are designed to self sharpen as they wear and do not need to be reversed, therefore reducing machine downtime. Adapter geometry is designed to protect the welded area from wearing, ensuring they are held on securely at all times. The teeth auto tighten onto the adapter under impact so there is no movement or wear on the adapter

nose. Adapter noses do not need to be built up.

Reuseable Pin and Retainer:

The twist pin and retainer are not damaged during installation or removal

and can be reused several times.

se. Adapter noses do not need to be built up.

Pin and Retainer:

twist pin and retainer are not ged during installation or removal

can be reused several times.

Adapter Wear Cap:

A slide-on mechanical wear cap is fitted to the top of each adapter to prevent wear and damage. These are held on by the tooth and can last up to 4 teeth changes before needing to be replaced, depending on the abrasiveness of

material.

Faster Tip Changes:

The teeth and wear caps are very quick and easy to replace

on-site by only one person.

Well Proven Product:

This STARMET system has been very well proven, tried and tested in extreme mining applications all over the world. With most large mining excavators successfully using this system in New Zealand mines and quarries, this is the obvious choice for maximum safety, savings and

productivity.

Reliable Supply:

West-Trak maintain large stock holdings of componentry at all times to ensure exemplary service and reliability of supply.

NEVER Lose a

bucket tooth again!

YOUR ANSWER TO GUARANTEED SAFETY,

SAVINGS AND PRODUCTIVITY

THE LOCKING SYSTEM:

The innovative twist pin solution ensures quick assembly and disassembly reducing your machines downtime.

Safer holding mechanisim giving excellent pin retention.

The pin is tapered to ensure a tight fit in the adapter, preventing any movement.

SELF SHARPENING TEETH

All teeth styles are designed to self sharpen as they wear, providing excellent penetration and longer service life.

Teeth are available in a range of different styles to suit all types of working applications and terrain.

Sharp teeth mean less fuel consumption for your machine.

BETTER BUCKET PENETRATION:

The streamline integrated geometry of the Tooth, Wear cap and Adapter allows for good flow of material and improved bucket

penetration.

LONGER ADAPTER LIFE:

The welded area is protected from premature wear (one of the primary causes of adapter breakage).

Tapered PinBody

Easier Extraction

ElastometRetainer

ExtractionArm

Square Cavity for a Standard Square Key

Plug

LockingArm

Welding AreaProtected

(E) Extra (EX) Extreme

(A) Abrasion (for loaders) (V) Vector (W) Double Vector

Part No A B C D E F Machine Size

1MA40WC45 45mm 266 198 114 30 409 20-30 Tonne

1MA50WC50 50mm 297 213 127 30 441 35-40 Tonne

1MA60WC60 60mm 314 206 145 30 486 45-55 Tonne

1MA120WC80 80mm 433 326 208 30 678 60-110 Tonne

1MA180WC100 100mm 445 337 200 30 717 120-140 Tonne

1MA240WC100 100mm 566 421 218 30 877 140-220 Tonne

1MA240WC120 120mm 566 421 218 30 877 140-220 Tonne

1MA500WC120 120mm 582 508 246 30 930 240-400 Tonne

1MA500WC140 140mm 582 508 246 30 930 240-400 Tonne

Part No A B C D E F G Machine Size

1MA240WS100 100mm 574 427 224 30 876 75 140-220 Tonne

1MA240WS120 120mm 574 427 224 30 876 75 140-220 Tonne

1MA500WS120 120mm 576 506 245 30 920 90 240-400 Tonne

1MA500WS120 140mm 576 506 245 30 920 90 240-400 Tonne

2-Strap Centre Adapters

2-Strap Straddle Adapters

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

Dimensions in mm

Centre Adapter Wear Cap

Straddle Adapter Wear Cap

Fig Part No A B C Machine Size

1 4MA40M 135 50 90 20-30 Tonne

1 4MA50M 150 75 96 35-40 Tonne

1 4MA60M 178 112 102 45-55 Tonne

1 4MA120M 208 104 129 60-110 Tonne

1 4MA180M 231 148 117 120-140 Tonne

1 4MA240M 245 164 140 140-220 Tonne

1 4MA500M 280 145 205 240-400 Tonne

2 4MA500MS 280 145 205 240-400 Tonne

Fig.1

C

B

A

Fig.2

C

B

A

Dimensions in mm

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

Extra Tip (E1) – Premium quality, self sharpening design

Extreme Tip (EX) – Premium quality, self sharpening design

Part No A B C D E KG Machine Size

MA40E 321 70 6 126 141 10.4 20-30 Tonne

External measurements in mm

E

BD

A

Part No A B C D E KG Machine Size

MA50EX 367 115 9 139 153 16.93 35-40 Tonne

MA60EX 409 130 13 161 176 24.0 45-55 Tonne

MA120EX 443 151 16 191 202 33.8 60-110 Tonne

MA180EX 492 202 23 212 225 52.3 120-140 Tonne

MA240EX 524 214 23 242 246 62.7 140- 220 Tonne

MA500EX 588 202 25 277 294 95.0 240-400 Tonne

External measurements in mm

A

C

E

D B

For general purpose applications. Provides good penetration

For high abrasive applications. Increased wear material for long service life

C

Vector Tip (V) – Premium quality, self sharpening design

Double Vector Tip (W) – Premium quality, self sharpening design

Part No A B C D E KG Machine Size

MA40V 332 8 8 126 141 8.13 20-30 Tonne

MA50V 359 13 8 139 153 10.13 35-40 Tonne

MA60V 407 15 10 161 176 15.7 45-55 Tonne

MA120V 475 18 12 191 202 23.45 60-110 Tonne

MA180V 516 10 18 212 225 32.5 120-140 Tonne

External measurements in mm

EC

BD

A

Part No A B C D E KG Machine Size

MA40W 332 163 8 126 141 10.63 20-30 Tonne

MA50W 359 181 8 139 153 13.7 35-40 Tonne

MA60W 407 205 10 161 176 19.6 45-55 Tonne

MA120W 475 241 12 191 202 31.0 60-110 Tonne

External measurements in mm

EC

BD

A

Provides maximum penetration

Provides maximum penetration. Often used on the outside adapters

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

Abrasion Tip (A) – Premium quality, self sharpening design

Part No A B C D E KG Machine Size

MA120A 463 188 – 191 202 48.0 CAT 992 / WA900

External measurements in mm

E C

BD

Pin & Retainer Part No A B C

2MA40PR 113 24 3/8

2MA50PR 132 28 1/2

2MA60PR 150 32 1/2

2MA120PR 177 30 1/2

2MA180PR 196 32.5 1/2

2MA240PR 213 37 3/4

2MA500PR 246 41 3/4

External measurements in mm

A

B

C

CAT 992 Loader Bucket with StarMet Abrasion Teeth, Hammerless Lip and Side Protectors

For use on loaders in high abrasion applications

General instructions for assembly and disassembly of StarMet teeth

Disassembly instructions

Tools

Fit the plug. Put on a stopper

to prevent the pin hole becoming

fi lled with soil, saving time and

cleaning when disassembling.

Turn the pin. Place the square

head of the extraction tool into the

pin hole and rotate the pin clockwise.

Remove the plug. Remove the

stopper to allow the removal of the

pin using the extraction tool.

Turn the pin. Place the square

head of the extraction tool into the

pin hole and rotate the pin

anticlockwise.

Recommended equipmentTo assemble and disassemble MTG StarMet teeth, an extraction tool is required.The use of protective clothing is also recommended: helmet, gloves and googles.

Position the bucketTo facilitate assembly and disassembly of the teeth, place the bucket so that the teeth are facing slightly upwards.

Cleaning adapterClean the whole tooth nose and the retainer housing. This enables subsequent assembly of the tooth and the retainer.

Push in the retainerPush the retainer into the recess in the nose of the adapter. Slide the wear cap on to adapter.

Assemble the toothPush the tooth on the nose of the adapter.

Push in the pinInsert the pin by hand until it stops.

Extraction toolStandard size square headed extraction tool.

Turn the pinPlace the square head of the extraction tool into the pin hole and rotate the pin clockwise.

Fit the plugPush in the plug to prevent the pin hole becoming filled with soil, saving time and cleaning when disassembling.

Remove the plugRemove the plug to allow removal of the pin using the extraction tool.

Turn the pinPlace the square head of the extraction tool into the pin hole and rotate the pin anticlockwise.

Remove the pinRemove the pin by hand to free the tooth.

BUCKET TEETH & ADAPTERS – STARMET SYSTEM

BUCKET TEETH & ADAPTERS – CATERPILLAR

Part No J-Series A B C Machine Size

4T1204 J200 235 33 58 2-5 Tonne

1U1254 J250 335 52 85 10-12 Tonne

1U1304 J300 350 65 95 15-20 Tonne

1U1354 J350 420 85 110 20-25 Tonne

8E0464 J460 480 90 135 35-40 Tonne

A

B C

Part No J-Series A B C Machine Size

6Y3224 J220 225 59 25 6-8 Tonne

6Y3254 J250 250 65/73 31 10-12 Tonne

3G6304 J300 310 84 35 15-20 Tonne

3G8354 J350 340 90 43 20-25 Tonne

7T3404 J400 381 120 48 25-30 Tonne

8E6464 J460 430 125 53 35-40 Tonne

1U1553 J550 520 150 67 45-50 Tonne

A

BC

Flushmount Weld-on Adapters

2-Strap Weld-on Adapterseld-on Adapters

Dimensions in mm

Dimensions in mm

Bolt-on Scraper Edge Adapters

Part No J-Series A B C D E Machine Size

9J8455 J250 130 76 45 43 24 613, 615

9J2307 J300 165 76 85 52 24 623, 627, 631

A

B

CDE

Adapter Repair Nose

Used for replacing worn or broken adapter noses

Part No A B C Machine Size

J250WN 70 80 30 10-12 Tonne

J300WN 85 88 35 15-20 Tonne

J350WN 100 110 32 20-25 Tonne

J400WN 115 135 34 25-30 Tonne

J450WN 125 130 40 35-40 Tonne

J550WN 145 140 44 45-50 Tonne

A

B

C

Existingadapter

Newnose

Simply weld into place

Exisistingngadapter

Newnose

Dimensions in mm

Dimensions in mm

BUCKET TEETH & ADAPTERS – CATERPILLAR

Standard Tip

For general purpose applications

Part No J-Series A B C Machine Size

1U3202 J200 55 63 145 4-6 Tonne

6Y3222 J220 63 73 165 6-8 Tonne

1U3252 J250 74 85 190 10-12 Tonne

1U3302 J300 89 96 215 15-20 Tonne

1U3352 J350 100 108 244 20-25 Tonne

7T3402 J400 116 127 268 25-30 Tonne

9W8452 J450 128 126 300 35-40 Tonne

9W8552 J550 154 140 330 45-50 Tonne

External measurements in mm

purp appl

Standard Tip – Premium quality, self sharpening design

For general purpose applications

Part No J-Series A B C Machine Size

MC30S J300 90 110 235 15-20 Tonne

MC35S J350 105 115 260 20-25 Tonne

External measurements in mm

C

B

A

C

B

A

BUCKET TEETH & ADAPTERS – CATERPILLAR

Penetration Abrasion Tip

Provides greater wear material for increased wear life in moderate to high impact applications

Part No J-Series A B C Machine Size

135-9300 J300 91 108 260 15-20 Tonne

144-1358 J350 105 120 285 20-25 Tonne

External measurements in mm

A

B

C

Heavy Duty Tip

For high abrasion and impact applications

Part No J-Series A B C Machine Size

9N4252 J250 78 94 200 10-12 Tonne

9N4302 J300 90 105 225 15-20 Tonne

External measurements in mm

A

B

C

BUCKET TEETH & ADAPTERS – CATERPILLAR

Heavy Duty Abrasion Tip

For high abrasion and impact applications

Part No J-Series A B C Machine Size

9N4253 J250HDAL 79 90 193 10-12 Tonne

9N4303 J300HDAL 94 108 220 15-20 Tonne

9N4353 J350HDAL 104 118 240 20-25 Tonne

External measurements in mm

B

C

Rock Chisel (RC) Tip

For very abrasive terrain providing good penetration and wear life

A

B

C

Part No J-Series A B C Machine Size

J250RC J250RC 75 85 220 10-12 Tonne

J350RC J350RC 104 115 280 20-25 Tonne

J400RC J400RC 120 130 315 25-30 Tonne

J450RC J450RC 130 140 330 35-40 Tonne

J550RC J550RC 160 157 385 44-50 Tonne

External measurement in mm

BUCKET TEETH & ADAPTERS – CATERPILLAR

Extra Tip – Premium quality, self sharpening design

For very abrasive terrain providing good penetration and wear life

Part No J-Series A B C Machine Size

MC35E J350 105 120 275 20-25 Tonne

MC40E J400 120 137 310 25-30 Tonne

MC45E J450 134 140 345 35-40 Tonne

MC55E J550 158 155 375 45-50 Tonne

External measurements in mm

Part No J-Series A B C Machine Size

3G8250 J250 72 88 200 10-12 Tonne

External measurements in mm

A

B

C

Wide Tip

For low penetration. Provides more bucket capacity

A

B

C

BUCKET TEETH & ADAPTERS – CATERPILLAR

Tiger Tip

Provides maximum penetration

Part No J-Series A B C Machine Size

J350tiger J350 105 110 285 20-25 Tonne

J400tiger J400 120 130 320 25-30 Tonne

J450tiger J450 135 138 360 35-40 Tonne

J550tiger J550 158 145 380 45-50 Tonne

External measurements in mm

B

C

Tiger Tip – Premium quality, self sharpening design

Provides maximum penetration

B

A

C

BUCKET TEETH & ADAPTERS – CATERPILLAR

A

Part No J-Series A B C Machine Size

MC25V J250 75 90 225 10-12 Tonne

MC30V J300 90 110 260 15-20 Tonne

MC35V J350 105 115 258 20-25 Tonne

MC40V J400 122 130 310 25-30 Tonne

MC45V J450 134 140 340 35-40 Tonne

MC55V J550 158 150 390 45-55 Tonne

External measurements in mm

Twin Tiger Tip

Provides maximum penetration. Often used on the outside adapters

Part No J-Series A B C Machine Size

J350twin J350 105 110 285 20-25 Tonne

J400twin J400 120 130 320 25-30 Tonne

J450twin J450 135 138 360 35-40 Tonne

J550twin J550 160 150 400 45-50 Tonne

External measurements in mm

Twin Tiger Tip – Premium quality, self sharpening design

Provides maximum penetration. Often used on the outside adapters

C

B

A

C

B

A

BUCKET TEETH & ADAPTERS – CATERPILLAR

Part No J-Series A B C Machine Size

MC25W J250 75 90 200 10-12 Tonne

MC30W J300 90 110 260 15-20 Tonne

MC35W J350 106 120 280 20-25 Tonne

MC40W J400 120 137 305 25-30 Tonne

MC45W J450 134 140 340 35-40 Tonne

MC55W J550 158 155 370 45-50 Tonne

External measurements in mm

p: 0800 654 323 I e: sales@west-trak.co.nz I w: west-trak.co.nz 2 4

A (mm) B(”) J-Series

51mm 2.0 J200

64mm 2.5 J250

76mm 3.0 J300

89mm 3.5 J350

102mm 4.0 J400

114mm 4.5 J450

140mm 5.5 J550

152mm 6.0 J600

A

BC

Pins and Retainers

BUCKET TEETH & ADAPTERS – CATERPILLAR

How to identify a CAT style Tip

To determine the size or J-family of a CAT style tip, whose reference has disappeared due to wear or any other reason, take the dimensions shown below.

Place a tape measure across the back of the tip at the midpoint of the side walls.

In addition, the second and third digits in the CAT part number often refer to the series. Example: IU3352 = J350 Series.

A / B

Pin No Retainer No A B C J-Series

8E6208 8E6208 11 60 22 J200

6Y3228 8E6259 14 67 30 J220

9J2258 8E6259 14 77 30 J250

9J2308 8E6259 14 92 30 J300

9W2678 8E6359 19 106 40 J350

7T3408 7T3409 22 118 42 J400

9W8296 8E6359 19 134 40 J450

8E0468 8E0469 24 134 44 J460

1U1558 8E5559 25 162 53 J550

616608 616609 30 192 59 J600

Dimensions in mm

Standard Tip

For most general purpose applications

External measurements in mm

Part No A B C Machine Size

2713-1221 85 85 200 DX140

2713-1217 100 98 225 DX225

2713-1219 108 108 245 DX300

K1005018 126 126 280 DX340

K1004145 145 145 305 DX420, 520

Rock Chisel (RC) Tip

For very abrasive terrain. Provides good penetration and wear life

A

B

C

External measurements in mm

Part No A B C Machine Size

K1000344RC 95 100 255 DX225

713-00054ARC 110 115 280 DX300

K1004145RC 145 145 330 DX420, 520

BUCKET TEETH & ADAPTERS – DOOSAN

B

C

A

Tiger Tip

Provides maximum penetration

External measurements in mm

Part No A B C Machine Size

71300057A 83 88 220 DX140

K1000344T 98 100 245 DX225

71300054AT 110 116 295 DX300

K1005018T 127 135 340 DX340

K1004145T 143 148 345 DX420, 520

External measurements in mm

Part No A B C Machine Size

K1000344WT 98 102 250 DX225

K1004145WT 145 143 345 DX420, 520

Twin Tiger Tip

Provides maximum penetration. Often used on the outside adapters

es maximum penetration

A

B

C

A

B

C

BUCKET TEETH & ADAPTERS – DOOSAN

Pins & Retainers

A

BC

Machine Pin No Retainer No A B C

DX140 2705-1022 2114-1859 17 93 26

DX225 2705-1020 2114-1845 19 93 35

DX300 2705-1021 2114-1849A 19 116 34

DX340 7050-0006 1140-0246 23 125 –

DX420/520 2705-1034 2114-1931 25 145 43

Dimensions in mm

BUCKET TEETH & ADAPTERS – DOOSAN

Fig.1

Flushmount Adapters

2-Strap Adapters

Fig Part No S-Series A B C Machine Size

1 MB81 N/A 133 45 40 1-3 Tonne

2 833-18 18s 96 55 22 4-6 Tonne

3 800-18 18s 175 60 22 4-6 Tonne

3 23574-22 22s 225 56 26 7-8 Tonne

3 A1306-25 25s 225 72 27 8-10 Tonne

3 B3210T-30 30s 300 86 35 12-15 Tonne

3 B3210T-35 35s 320 102 33 15-25 Tonne

B

C

A

Fig.2 BC

A

BUCKET TEETH & ADAPTERS – ESCO

Fig.3

B

C

A

Dimensions in mm

Adapter Repair Nose

Used for replacing adapter noses that are worn or broken

Part No A B C Machine Size

18WN 55 60 48 7-8 Tonne

Bolt-on / Weld-on Tips

These can be bolted or welded onto bucket edges

Part No A B C D E

68049 Mini 01 192 86 54 40-45 1/2

66179 Mini 02 224 97 60 55-60 5/8

A

B

D E

C

A

B

C

ExistingAdapter

NewNose

Simply Weld into Place

ExistingAdapapteter

NewNose

Dimensions in mm

Dimensions in mm

BUCKET TEETH & ADAPTERS – ESCO

Fig.1 A

B

C

Mini Tip Range

Fig.3 A

B

C

Fig.2

A

B

C

BUCKET TEETH & ADAPTERS – ESCO

Fig.4A

B

C

Fig Part No A B C Machine Size

1 MB4F 46 46 95 1-3 Tonne

2 MN18L 60 51 120 4-6 Tonne

4 18VIP 60 50 155 4-6 Tonne

3 18TVIP 62 50 155 4-6 Tonne

2 22S 62 64 138 7 Tonne

External measurements in mm

Standard Tip

For most general purpose applications

Part No S-Series A B C Machine Size

BC22S 22S 62 64 138 7-8 Tonne

BC25S 25S 85 75 167 8-10 Tonne

BC30S 30S 95 78 160 10-15 Tonne

BC35S 35S 112 95 190 15-25 Tonne

External measurements in mm

Part No S-Series A B C Machine Size

MN25S 25S 80 78 175 8-10 Tonne

MN30S 30S 95 80 180 10-15 Tonne

MN35S 35S 114 90 200 15-25 Tonne

MN40S 40S 125 105 240 26-35 Tonne

External measurements in mm

Standard Tip – Premium quality, self sharpening design

For most general purpose applications

A

B

C

B

A

C

BUCKET TEETH & ADAPTERS – ESCO

Part No S-Series A B C Machine Size

25VIP 25S 90 80 215 8-10 Tonne

30VIP 30S 88 78 210 10-15 Tonne

35VIP 35S 120 95 250 15-25 Tonne

External measurements in mm

A

B

C

Tiger Tip

Provides maximum penetration

Twin Tiger Tip

Provides maximum penetration. Often used on the outside adapter

Part No S-Series A B C Machine Size

25TVIP 25S 88 78 215 8-10 Tonne

30TVIP 30S 88 78 215 10-15 Tonne

35TVIP 35S 120 95 250 15-25 Tonne

External measurements in mm

A

B

C

BUCKET TEETH & ADAPTERS – ESCO

Pins and Locks

Roll Pins

A

B

C

D

Pin Lock A B

MB8 MB8 51 8

Dimensions in mm

BUCKET TEETH & ADAPTERS – ESCO

A

B

Pin Lock A B C D

18PN 18LK 55 13 36 9

22PN 22LK 67 18 45 16

25PN 25LK 75 20 39 21

30PN 30LK 75 20 39 21

35PN 35LK 86 23 47 22

40PN 40LK 98 30 47 22

45PN 45LK 104 33 57 23

Dimensions in mm

How to identify an ESCO style Tip

To determine the size or family of a ESCO conical tip, whose reference has disappeared due to wear or any other reason, take the INTERNAL dimensions A and B shown below. Dont take external measurements because they may have been affected by wear

A B ESCO Family

46 35 18S

46 46 22S

64 55 25S

75 58 30S

88 68 35S

98 75 40S

112 85 45S

Dimensions in mm

A

B

BUCKET TEETH & ADAPTERS – ESCO

2-Strap Adapters

Part No A B C Machine Size

E151-3017 290 98 35 12-21 Tonne

Part No A B C Machine Size

E262-3127 370 110 40 26-32 Tonne

A

B

C

A

B

C

Dimensions in mm

Dimensions in mm

BUCKET TEETH & ADAPTERS – HYUNDAI

External measurements in mm

Part No A B C Machine Size

E161-3027 98 90 212 12-21 Tonne

A

B

C

External measurements in mm

Part No A B C Machine Size

E262-3046 115 105 255 26-32 Tonne

A

B

C

Standard Tip

Suitable for most general purpose applications

BUCKET TEETH & ADAPTERS – HYUNDAI

External measurements in mm

Part No A B C Machine Size

E161-3027RC 98 90 255 12-21 Tonne

External measurements in mm

Part No A B C Machine Size

E262-3046RC 120 110 295 26-32 Tonne

Rock Chisel (RC) Tip

For very abrasive terrain, providing good penetration and wear life

A

B

C

A

B

C

BUCKET TEETH & ADAPTERS – HYUNDAI

Tiger Tip

Provides maximum penetration

External measurements in mm

Part No A B C Machine Size

E161-3027T 98 90 220 12-21 Tonne

External measurements in mm

Part No A B C Machine Size

E262-3046T 120 110 295 26-32 Tonne

A

B

C

A

B

C

BUCKET TEETH & ADAPTERS – HYUNDAI

Twin Tiger Tip

Provides maximum penetration. Often used on the outside adapters

External measurements in mm

Part No A B C Machine Size

E161-3027WT 98 90 235 12-21 Tonne

External measurements in mm

Part No A B C Machine Size

E262-3046WT 120 110 305 26-32 Tonne

1073485, 107-3485 Cat D8k D9h Ripper Shank

Machine Pin No Retainer No A B C

12-21 Tonne SB80PN SB80/235WS 19 101 32

26-32 Tonne SB235PN SB80/235WS 19 116 34

Pins & Retainers

Dimensions in mm

BUCKET TEETH & ADAPTERS – HYUNDAI

2-Strap Adapters

Part No KM-Series A B C Machine Size

205-70-68141 KM16 300 90 36 10-25 Tonne

207-70-14142 KM21 370 115 42 25-35 Tonne

208-70-14143 KM26 411 136 50 35-42 Tonne

209-70-54143 KM41 615 170 82 45-65 Tonne

Part No KM-Series A B C Machine Size

205-70-19570 KM15 95 100 222 10-25 Tonne

207-70-14151 KM20 120 115 240 25-35 Tonne

208-70-14152 KM25 150 122 275 35-42 Tonne

External measurements in mm

4T4453 Caterpillar Style Ripper Tip

B C

4T-4501 or 4T4501 SHORT CENTERLINE TIP

B

6Y-6138, 6Y6138 Caterpillar Single Shank

Standard Tip

For most general purpose applications

BUCKET TEETH & ADAPTERS – KOMATSU

Dimensions in mm

Tiger Tip – Premium quality, self sharpening design

Provides maximum penetration

Part No KM-Series A B C Machine Size

MK200V KM15 98 114 270 15-25 Tonne

MK300V KM20 122 122 300 25-35 Tonne

MK400V KM25 148 135 340 35-42 Tonne

MK650V N/A 180 200 430 65-70 Tonne

External measurements in mm

Pin No A B Machine

20X-70-00150 20 71 PC60

09244-02496 25 97 PC200

175-78-21810 25 116 PC300

09244-03036 30 136 PC400

209-70-54240 36 163 PC650

Ripper Attachments Shank Teeth 4T4501 fits CAT D9T D9R D9N

B A B KM/PC Series

75 75 KM15/PC200

95 85 KM20/PC300

112 95 KM25/PC400

130 130 PC650

Dimensions in mm

D10, D10N Caterpillar Style Ripping Tooth 4T4501, 4T-4501

107-3485 Ripper Shank fit Cat D8K, D8N, D8L, D9H, D9N

Looking at the back of tip

How to identify a KOMATSU Style Tip

To determine the size or family of a KOMATSU tip, whose reference has disappeared due to wear or any other reason, take the INTERNAL dimensions A and B shown below. Dont take external measurements because they may have been affected by wear.

Pin Assemblies

A

B

C

Dimensions in mm

BUCKET TEETH & ADAPTERS – KOMATSU

RECOMMENDED

GRODBREAKER BACHOES • Bolt-on bucket teeth are durable and easy to replace. • Greasable end pins
GRODBREAKER BACHOES €¢ BOLT-ON BUCKET TEETH ARE DURABLE AND EASY TO REPLACE. €¢ GREASABLE END PINS
DOCUMENTS
CP – Excavator Bucket updated powerfill chart .¥ Esco, Hensley, CAT, or Metalogenia KingMet teeth
CP – EXCAVATOR BUCKET UPDATED POWERFILL CHART .¥ ESCO, HENSLEY, CAT, OR METALOGENIA KINGMET TEETH
DOCUMENTS
Coaxial Adapters, Within Coaxial Adapters, Between … Coaxial Adapters, Within (Conform to IEEE-Std-287)
COAXIAL ADAPTERS, WITHIN COAXIAL ADAPTERS, BETWEEN … COAXIAL ADAPTERS, WITHIN (CONFORM TO IEEE-STD-287)
DOCUMENTS
SPECIALIZED IN TEETH, ADAPTERS SHROUDS msts.eu/katalozi/Site zabi.pdf SPECIALIZED IN TEETH, ADAPTERS
SPECIALIZED IN TEETH, ADAPTERS SHROUDS MSTS.EU/KATALOZI/SITE ZABI.PDF SPECIALIZED IN TEETH, ADAPTERS
DOCUMENTS
Sensor Accessories Connector adapters; Current adapters .Sensor Accessories Connector adapters; Current
DOCUMENTS
TEETH & ADAPTERS 61NB-31310 Heavy Duty Long 42.4 lbs R450LC-7, 500LC-7A 61NB-31320 .. 1.97â€‌, Square
DOCUMENTS
CAT STYLE BUCKET TEETH – West-Trak New .CAT STYLE BUCKET TEETH … AWS E 70 T5 (basic type); DIN
CAT STYLE BUCKET TEETH – WEST-TRAK NEW .CAT STYLE BUCKET TEETH … AWS E 70 T5 (BASIC TYPE); DIN
DOCUMENTS
KUBOTA EXCAVATOR – GGH rpm mm Machine weight (w/o extra counter weight ) Bucket capacity, std. SAE/CECE Bucket width Engine Swivelling speed Rubber shoe width With side teeth Without
KUBOTA EXCAVATOR – GGH RPM MM MACHINE WEIGHT (W/O EXTRA COUNTER WEIGHT ) BUCKET CAPACITY, STD. SAE/CECE BUCKET WIDTH ENGINE SWIVELLING SPEED RUBBER SHOE WIDTH WITH SIDE TEETH WITHOUT
DOCUMENTS
RF/Microwave Adapters DC  65 GHz Adapters RF ADAPTERS RF Adapters In-Series & Between-Series These
RF/MICROWAVE ADAPTERS DC  65 GHZ ADAPTERS RF ADAPTERS RF ADAPTERS IN-SERIES & BETWEEN-SERIES THESE
DOCUMENTS
China Bucket Teeth, Tooth Point, Bucket Tooth, Bucket Adapters 2015-03-20آ BUCKET TEETH THE GLOBAL
CHINA BUCKET TEETH, TOOTH POINT, BUCKET TOOTH, BUCKET ADAPTERS 2015-03-20آ BUCKET TEETH THE GLOBAL
DOCUMENTS
TEETH – Teeth Adapters Materiai Specification 30MnCrB5H 30MnCrB5H Mechanical Properties Surface Hardness
TEETH – TEETH ADAPTERS MATERIAI SPECIFICATION 30MNCRB5H 30MNCRB5H MECHANICAL PROPERTIES SURFACE HARDNESS
DOCUMENTS
Centrisart Centrifuges The Ultimate Speed. Maximum … Swing-out rotor, 4 place, for bucket YCSB-B9B YCSB-B9B Round bucket for adapters YCSA-R0B – YCSA-RDB, sealable with lid YCSM-B9B,
CENTRISART CENTRIFUGES THE ULTIMATE SPEED. MAXIMUM … SWING-OUT ROTOR, 4 PLACE, FOR BUCKET YCSB-B9B YCSB-B9B ROUND BUCKET FOR ADAPTERS YCSA-R0B – YCSA-RDB, SEALABLE WITH LID YCSM-B9B,

error: Content is protected !!