BUCKET WEAR STRIP HEAT-TREATED SINGLE BEVEL

BUCKET WEAR STRIP HEAT-TREATED SINGLE BEVEL

BUCKET WEAR STRIP HEAT-TREATED SINGLE BEVEL

HB500 (Heat treated for greater productivity) Single Bevel Bucket Wear Edge Strip

Hardened and tempered steel suitable for applications with extreme and particularly heavy wear
Hardness HB 470-530 (after the heat treatment performed on the entire thickness of the profile)
Produced from an alloy steel with a low carbon content
Easy to weld and work
Extreme hardness as a result of an excellent chemical composition
No additional machining required (unlike sheet steel, saving time and money)
Mechanical properties remain the same throughout the section (sheet steel profile properites can vary near the bevelled area)

150 x 20 x 2500mm (6″ x 3/4″ x 98″),Weld-On, Profile dimensions (mm) A = 150, H = 20, B = 5, D = 5
200 x 20 x 2500mm (8″ x 3/4″ x 98″) Weld-On, Profile dimensions (mm) A = 200, H = 20, B = 6, D = 8
200 x 25 x 2500mm (8″ x 1″ x 98″) Weld-On, Profile dimensions (mm) A = 200, H = 25, B = 11, D = 8
200 x 20 x 3000mm (8″ x 3/4″ x 118″) Weld-On, Profile dimensions (mm) A = 200, H = 20, B = 6, D = 8
150 x 20 x 3000mm (6″ x 3/4″ x 118″) Weld-On, Profile dimensions (mm) A = 150, H = 20, B = 5, D = 5
200 x 25 x 3000mm (8″ x 1″ x 118″) Weld-On, Profile dimensions (mm) A = 200, H = 25, B = 11, D = 8

​​Half Arrow sections are available in 8″ and 10″ widths, and with head thicknesses ranging from 1.375″ to 2.7″. This carbon or boron steel product is used in heavy equipment, snow removal and mining equipment applications.
Custom specific grades with chemistry & mechanical property requirements are availabe upon inquiry.
Lengths from 15′ to 65′ are available, but custom lengths are available. Saw cutting to shorter lengths is available.
Testing such as hardness, tensile, microcleanliness, charpy, macro is available when requested. Please inquire on testing not listed.
Additional value added processing is available such as saw cutting, pickle & oil, and machine straightening.
Heat treatment such as normalize, temper, LP Anneal, isothermal anneal, quench & temper, stress relief anneal.
Please inquire on other value added processing not listed.​​

4T3013, 7J9477 Wear Parts Cutting Edge

CUTTING EDGES WITH THE LONGEST LIFE

Grader End Edge 7D2084, 1C6180, 2D7998, 2Y4985, 5Y1603

Bolt-on Corner Half Arrow Edge Protection 109-9082, 1099082

1359544, 135-9544 CAT Central Half Arrow Edge

Half Arrow Blades & Cutting Edges

116-7462 9W5730NRR Caterpillar Edge Segment 3 Bolt

error: Content is protected !!