Construction Excavator Buckets

Construction Excavator Buckets

Construction Excavator Buckets

Excavator General Purpose Bucket
The General Purpose Bucket was created for digging in top soil, clay, loam, organic matter, and crushed stone. The GP bucket is designed for low to medium breakout forces in standard excavating works. Made with a selection of the best abrasion-resistant steels and fitted with your choice of ground engaging tools.

General Purpose Bucket for all excavators between 12-45 tons
Suitable for soil class I-IV with material density up to 1600 kg/m3
Bucket width up to 1800 mm, and bucket capacity up to 2.3 m3
Available with welded teeth, bolt-on cutting edge, or welded edge
Outer wear package is S-355 steel grade for a long service life
Optional side cutters for added material retention and penetration
Pin-on hinge, CW Series, MS Series, and S Series quick coupler type

Excavator Heavy Duty Bucket
The Heavy Duty Bucket range has a superior wear package compared to the general purpose bucket, and can survive tougher applications with medium to high breakout forces. This heavy duty excavator bucket is built for extra service life in medium abrasive materials like crushed rock, chalk, shale, limestone, and frozen soil.

Heavy Duty Bucket for all excavators between 12-60 tons
Suitable for soil class I-IV with material density up to 1800 kg/m3
Bucket width up to 2000 mm, and bucket volume up to 3 m3
Dual radius profile in bucket floor and heel for long wear life
450 HB base edge, cheek plates, and horizontal wear bars
Installed with your choice of bucket teeth, side cutters & shrouds
Pin-on hinge, CW Series, MS Series, and S Series quick coupler type
Custom wear package is available for special requirements

Excavator Rock Bucket
Rock Buckets are made of considerably thicker steel compared to the standard bucket, and is equipped with additional wear plates for extreme break-out and tear-out forces. Our rock buckets are designed for excavation of heavy soils with stony inclusions and abrasive materials like sandstone, granite, basalt, and silica sand.

Customized Rock Buckets for all excavators between 12-80 tons
Standard Rock Buckets for soil density up to 2000 kg/m3, I-II abrasion.
Heavy Duty Rock Buckets for soil density up to 2200 kg/m3, III-IV abrasion
Reinforced Rock Buckets for soil density up to 2500 kg/m3, V-VI abrasion
Severe Rock Buckets for soil density up to 2800 kg/m3, VII abrasion
Bucket width up to 2100 mm, and bucket capacity up to 3.8 m3
Equipped with rock teeth, lip shrouds, wing shrouds & heel shrouds
450 HB inside liner plates and overlay plates used as required
Add wear buttons and chocky bars for greater wear protection
Configured for pin-on, CW Series, MS Series, S Series quick coupler
Can be installed with GET by Esco, Futura, Hensley, MTG etc

Excavator Ripper Bucket
The Ripper Bucket is built with wear-resistant Swedish steel for high strength and a long wear life. This bucket has a single centre ripper or can be built with multi rippers for increased penetration performance with rocky and abrasive materials like caliche, coral rock, sandstone, shale, granite, basalt, and frozen soil.

Penetration Ripper Bucket for all excavators between 20-50 tons
Resistant to soil VII abrasion with material density up to 2500 kg/m3
Bucket width up to 1400 mm, and bucket volume up to 1.5 m3
Designs for single ripper, multi ripper, and staggered teeth
Excellent bucket breakout force with shorter pin to tip radius
Side reinforcing plates and wear runner plates are 450 HB
Installed with penetration bucket teeth and optional side cutters
Fully customized to meet your exact ripping requirements

Excavator Trench Bucket
Trench Buckets are experts at digging trenches for pipelines and other essential installations in materials like sand, top soil, clay, loam, and crushed rock. Our trench buckets are built with premium wear-resistant steel, and are reinforced on the bottom and sides for maximum longevity and trench digging performance.

Trench Digging Bucket for all excavators between 12-34 tons
Use in soils with I-III class abrasion, material density up to 1600 kg/m3
Bucket width up to 750 mm, and bucket capacity up to 0.7 m3
Available with a weld-on edge, reversible edge, or with teeth
Side plates and bottom are reinforced with 450 HB steel
Optional side cutters for extra penetration & wear protection

Excavator Grading/Tilting Bucket
The Grading Bucket is available in standard configuration or with hydraulic tilt cylinders for working on angled surfaces like embankments, ditches, canals, water drains, and road sides.

Versatile Grading Bucket for all excavators between 12-34 tons
Used to handle light bulk materials with a density up to 1100 kg/m3
Bucket width up to 2500 mm, and bucket capacity up to 1.2 m3
Strong wear-resistant steel construction for a long service life
Installed with 450 HB weld-on cutting edge, or bolt-on blade
Reinforced steel ribs and wear runners for abrasive rocky work
Optional hydraulic tilt cylinders for 45° left/right movement

Excavator Trapezoidal Bucket
Trapezoidal Buckets have a unique v-shape design with a rounded bottom for efficiently digging channels and forming slopes. We custom-build trapezoidal buckets to match your working side angles, special requirements are welcome.

V-Shape Trapezoidal Bucket for all excavators between 11-25 tons
Various overall widths up to 3000 mm, with 400 mm base width
Custom shape and tilt angles up to 75° to suit customer requests
Cutting edge and side edges are 450 HB wear-resistant steel
Optional bolt-on reversible edge and tooth-adapter system
GET A QUOTE

How to improve The Excavator Bucket Teeth Service Life

JCB 3CX, 4CX Loader Bucket Side Cutters 531/03208, 531/03209

85801109 (85811440) Bucket Teeth for New Holland LB-90, LB-95, LB-110, LB-11

New Holland Case 85801376 Bucket Left Side Tooth

810-10600, 81010600 JCB HMK New Holland Bucket Teeth for Backhoe

810/10600 New Holland JCB Hidromek Loader Bucket Unit Tooth

Case New Holland 85801376 E29 Backhoe Bucket Tooth LH

531/03205 JCB Excavator Bucket Attachment Unitooth

error: Content is protected !!