CUTTING EDGES WITH THE LONGEST LIFE

CUTTING EDGES WITH THE LONGEST LIFE

CUTTING EDGES WITH THE LONGEST LIFE

High performance cutting edges are our specialty and our Hardox EnduroBlades are the best you’ll find on the market.

WORKS HARDER, LONGER
Hardox’s unique combination of hardness and toughness is the key to NBSJ Blades consistently outlasting the competition. Hardox is equally hard throughout the entire plate so it delivers the same wear resistance during the plate’s entire service life.

We guarantee you’ll get better cost-per-hour performance from an SJ Blade over your previous cutting edge product. If you experience otherwise we’ll refund the difference in cost-per-hour from your previous product. In order to make a fair comparison you must provide accurate records of the wear life of both products. The machine, operator, site must also be the same for both products.

Below are some examples of Cutting Edges we specialise in

Loader Edges
Base edges, Bolt on Edges, Half Arrows, Side Cutters and cutting edges

Excavator Edges
Base edges, Bolt on Edges, Side Cutters and Base edges for Adapters

Scraper Edges
Router bits, Bolt on Edges, and End Bits

Dozer Edges
Bolt on Edges, Hot Cupped End Bits, Level Cut End Bits, plus Plow Bolts and Nuts

Bar Stock
Single and Double Bevel Bar stock, and Pre-Drilled

 

Cutting Edges & End Bits
Bulldozer cutting edges and end bits
Scraper cutting edges and router bits
Loaders and excavator base edges and bolt-on cutting edges
Grader blades
Sharq P300TM gravel grader blade
Plow bolts and nuts
Custom Designs and site audits

Custom Designs and site audits
If you would like to modify a cutting edge or end bit from its standard production specifications or in the unlikely event that we do not stock your part, you can order a tailored solution from our Australian manufacturing facility.

You will work with our specialist R&D team, dedicated to delivering customised cutting edges and end bit product solutions. They will even attend your site to inspect existing systems and provide recommended solutions to drive improved product performance and lifespan.

Self Shapning Ripper Tooth 19M-78-11510

198-78-21380 HEAVY-DUTY Bulldozer Ripper Boot Short

D375A D475A D475ASD Dozer Bucket Point 198-78-21340

198-78-21340 Replacement Komatsu D475 Ripper Tooth

KOMATSU Bucket Tooth for Ripper D155A 175-78-34141

Komatsu D155 Tooth HD 175-78-31232 for Multi Rippers