Construction Equipment Heavy Excavator Buckets G Class / H Class / S Class / X Class Doosan Bucket using the 6 Kinds of Good REASONS
DOOSAN EXCAVATOR BUCKETS Doosan has combined the strengths of both Doosan, a leading manufacturer of excavator machines and Geith, a leading manufacturer of excavator attachments to develop a new series of excavator buckets. The new series of buckets are based on designs that have been developed over 50 years through customer feedback and experience in all markets throughout the world.
One-stop shop One place for complete solutions : (carrier + Bucket + parts + service)
Service Broad coverage via the DOOSAN service network, fully supported by DOOSAN product specialists.
Engineering approved Optimized for DOOSAN equipment high efficiency and performance, resulting in lower running and maintenance cost.
Quality Products manufactured to highest standards. Warranty Avoid compatibility issues and operating differences from using Non-approved Bucket. Plug & Play readiness Easy to install and operate.
The series is comprised of 4 kinds of bucket types which are General Construction Bucket, Heavy Construction Bucket, Severe Mining Bucket, and Xtreme Mining Bucket.
HEAVY EXCAVATOR BUCKET TOUR Heavy Construction Bucket, which is also called H class bucket, is the most commonly used bucket in the construction equipment market and is designed mainly for use in heavy construction but also used in low density mining and quarry application.
Wrapper (Shell) Shape increases heel clearance and decreases wear rate.
Hinge Optimized reinforced construction for high strength and performance matched to the machine‘s power.
Side Wear Plates
Lip Plate (Cutting Edge)
Side plates meet up with bottom wear plates for seamless corner protection.
Beveled edge for better penetration and 500BHN material for high abrasion resistance.
Adapter
Tooth (Tip)
Corner adapter Positioned under cast corner to increase strength.
Designed with mechanical properties that maintain hardness for long wear life in tough digging applications.
Cast Corner
Horizontal Bottom Wear Plates
high strength (400HB) wear resistant material used in ground engaging area. No bolt on parts required (removes risk of losing parts).
Protects bottom section and reinforces bucket for greater strength and rigidity. Designed for easily replacement during maintenance repair.
General Construction Bucket
Heavy Construction Bucket
class
class GENERAL CONSTRUCTION BUCKET, which is also called G class bucket, is designed for digging and re-handling soft to medium materials e.g. materials with low wear characteristics such as top-soil, loam, coal.
Job Application Agriculture
General Construction
Heavy Construction
Quarry & Mining
Forestry
Demolition
HEAVY CONSTRUCTION BUCKET, which is also called H class bucket, is the most commonly used bucket in the construction equipment market and is designed mainly for use in heavy construction but also used in low density mining and quarry application.
Job Application
Recycling
Agriculture
Recommended applications such as: heavy construction, road works, ground clearing, trenching and loading.
Buckets
ral ruction on
Earth moving Attachments
Agriculture Quarry Heavy Agriculture & Mining Construction
General Forestry Quarry General Construction & Mining Construction
Demolition Attachments
Heavy Demolition Heavy Forestry Construction Construction
Material Handling
Attachments
Quarry Recycling Quarry Demolition Mining &&Mining
Connecting Attachments
Forestry Forestry Recycling
2 113-3140 Cat Style Weld-on Half-Arrow
2 Center Hand Bucket Half Arrow 113-3140
3 1133140, 113-3140 CAT Half Arrows
1 WAY PIPING
2 WAY PIPING
2 nd SPOOL
3 rd SPOOL
Land Clearing Attachments
Demolition Demolition
Snow Removal Attachments
Buckets
Recycling Recycling
Agriculture
General Construction
Agriculture Quarry & Mining
Heavy Construction
General Forestry Construction
PIPING PIPING SPOOL · 34 different models
Heavy Demolition Construction
1 ROTATING PIPING
CLAMSHELL PIPING
QUICK COUPLER PIPING
QUICK COUPLER
DIRECT MOUNTING
SPOOL MaterialHandling Handling Material
Material Handling
PIPING Connecting Connecting Snow Removal Attachments Attachments Attachments
PIPING LandClearing Clearing Land Attachments Attachments
· Diamond folded section for greater structural strength
PIPING TYPE TYPE · Improved side cutter design for penetration and Protection Buckets Earth moving Attachments Attachments · Optimized designed genuine Doosan GD tooth point forDemolition general
SnowRemoval Removal Snow Attachments Attachments
Material Handling Buckets
Attachments
Earth moving Connecting Attachments Attachments
· High grade material composition for better durability
SPOOL AY PIPING
Demolition
Attachments
Forestry
Connecting Attachments
Demolition
Land Clearing Attachments
113-3142,1133142 Weld-on Half-Arrow LH
2 WAY PIPING
2 nd SPOOL
3 rd SPOOL
rd ROTATING PIPING
CLAMSHELL PIPING
PIPING
PIPING
Demolition Land Clearing Attachments Attachments
Connecting Snow Removal Attachments Attachments Attachments – 14-70 tons Models are available Material Handling
SPOOL Land Clearing Attachments
Snow Removal Attachments
nd 31rd1WAY 2WAY SPOOL SPOOL PIPING PIPING
ROTATING rd SPOOL WAY PIPING PIPING 232WAY PIPING
CLAMSHELL ROTATING SPOOL 22ndndSPOOL PIPING PIPING
8E5341, 8E-5341 Caterpillar Parts SHANK
1 WAY PIPING
2 WAY PIPING
2 nd SPOOL
WAY
QUICK ROTATING ROTATING QUICK COUPLER PIPING PIPING COUPLER PIPING
CLAMSHELL DIRECT CLAMSHELL QUICK PIPING MOUNTING PIPING COUPLER
· Inserted casting corner design for penetration
· Overlapping plate for protecting Lip plate and increasing strength
· High grade material composition for better durability – Used HB400-500 grade material on Lip plate and wear parts
· Deep profile for High capacity
rd rd
QUICK CLAMSHELL COUPLER 3rdrdSPOOL SPOOL 3PIPING PIPING
PIPING TYPE TYPE · Low tip radius for greater digging performance · Optimized designed genuine Doosan HD tooth point for penetration
· Optimized Shape for better penetration and heel clearance
nd nd
QUICK QUICK DIRECT COUPLER COUPLER MOUNTING PIPING PIPING
QUICK QUICK COUPLER COUPLER
DIRECT DIRECT MOUNTING MOUNTING
WAY
nd
1 3
WAY rd
31rdWAY SPOOL PIPING
2
WAY
ROTATING 2 WAY PIPING PIPING
DIRECT MOUNTING
· Diamond folded section for greater structural strength
-U sed Thicker steel wear pad than previous generation model
2 3
QUICK COUPLER
FeatureWAY& Benefits
· Flat bottom shape for Multi-purpose such as damping, leveling
WAY WAY rd
QUICK COUPLER PIPING
WAY
· Quick Coupler Friendly design.
WAY WAY rdnd
Snow Removal Attachments
500BHN, High abrasion resistant steel
– Used HB400 grade material on Lip plate
3 12 23
Recycling
Recycling
· Quick Coupler Friendly design. · Optimized designed GD tooth point for general construction
WAY nd
Forestry
Material Handling
PIPING PIPING SPOOL · 47 different models
construction
· Overlapping plate for protecting Lip plate and increasing strength
2
Quarry Recycling & Mining
1 WAY PIPING
ROTATING
Demolition Demolition Earthmoving moving Earth Connecting Clearing Snow Land Removal Clearing Attachments Attachments Attachments Attachments Attachments Attachments Attachments Attachments Attachments Attachments Attachments – 5-50 Connecting tons ModelsLand are availableAttachments
Attachments Attachments
Demolition Attachments
Earth moving Attachments
High abrasion WAY WAY resistant ndsteel
rd
Feature & Benefits WAY WAY
Material Handling Demolition Buckets Buckets
Quarry & Mining
High strength steel
High abrasion WAY WAY resistant ndsteel
on moving ents hments
Heavy Construction
Recommended applications such as: heavy construction, road works, ground clearing, trenching and loading.
High strength steel
ROTATING
General Construction
2
nd
CLAMSHELL 2 nd SPOOL PIPING
3
rd
QUICK COUPLER 3 rd SPOOL PIPING
ROTATING QUICK PIPING COUPLER
CLAMSHELL DIRECT PIPING MOUNTING
QUICK COUPLER PIPING
QUICK COUPLER
DIRECT MOUNTING
Severe Mining Bucket
Xtreme Mining Bucket
Diamond folded section
Lip plate (cutting edge)
a) 30% increase in strength by adapting Diamond shape
High Abrasion Resistance material (400-500BHN)
and increasing thickness of steel
class
class
Common parts
Structure improved by overlapping cutting edge and bottom
b) Overlap of bottom section and folded section increases the
section improved penetration by beveled shape.
strength of bucket structure.
XTREME MINING BUCKET, which is also called X class bucket. The bucket is designed for use in high density mining and quarry application using high strength and high abrasion resistance materials. It can be used in the toughest of applications.
SEVERE MINING BUCKET, which is also called S class bucket. The bucket is designed for use in high density mining and quarry application using high strength and high abrasion resistance materials. It can be used in the toughest of applications.
a Agriculture
General Construction
Heavy Construction
Job Application
Quarry & Mining
Forestry
Demolition
Recycling
Agriculture
General Construction
Heavy Construction
Job Application
Recommended applications such as: gravel, ripped basalt, caliche, shot granite, high silica sand, sharp rock and other dense materials.
Quarry & Mining
Forestry
Demolition
b
Recycling
Recommended applications such as: ripped basalt, caliche, shot granite, high silica sand, sharp rock and other dense materials.
Bottom section G class
H, S, X class bucket
Flat bottom shape for Multi-purpose Deep profile for High capacity such as damping, leveling. Buckets
eneral neral nstruction ction nstruction
Earth moving Attachments
Heavy Quarry Heavy Construction & Mining Construction
Quarry Forestry Quarry Mining &&Mining
Demolition Attachments
Forestry Demolition Forestry
Material Handling
Attachments
Connecting Attachments
Demolition Recycling Demolition
Land Clearing Attachments
Snow Removal Attachments
Buckets
Recycling Recycling
Agriculture
Agriculture General Agriculture Construction
General HeavyGeneral Construction Construction Construction
Heavy Quarry Heavy Construction & Mining Construction
2
2
3
2 WAY PIPING
2 nd SPOOL
3 rd SPOOL
High abrasion WAY WAY resistant ndsteel
WAY
ROTATING PIPING
CLAMSHELL PIPING
QUICK COUPLER
DIRECT MOUNTING
Material Handling Demolition Demolition
Attachments Attachments Attachments
MaterialHandling Handling Material Connecting Attachments Attachments Attachments
Connecting Land Connecting Clearing Attachments Attachments Attachments
PIPING
Land Clearing Snow Land Removal Clearing Attachments Attachments Attachments
PIPING
Connecting Attachments
Demolition Recycling Demolition
2
2
3
Land Clearing Attachments
Snow Removal Attachments
Recycling Recycling
2 WAY PIPING
2 nd SPOOL
3 rd SPOOL
SnowRemoval Removal Snow Attachments Attachments
Buckets
rd
Buckets EarthBuckets moving Attachments
– Weld on side cutter design for Protection and material management
· Overlapping plate for protecting Lip plate and increasing strength. · Quick Coupler Friendly design.
Demolition Earthmoving moving Earth Attachments Attachments Attachments
ROTATING PIPING
CLAMSHELL PIPING
PIPING
PIPING
QUICK COUPLER PIPING
QUICK COUPLER
DIRECT MOUNTING
Feature & Benefits
WAY
WAY
· 11 different models SPOOL SPOOL PIPING PIPING – 34-70 tons Models are available
· OptimizedTYPE designed genuine PIPING TYPE Doosan SD tooth point for strength · Added more patches for durability and strength
· Diamond folded section for greater structural strength
Material Handling Demolition Demolition
Attachments Attachments Attachments
MaterialHandling Handling Material Connecting Attachments Attachments Attachments
Connecting Land Connecting Clearing Attachments Attachments Attachments
Land Clearing Snow Land Removal Clearing Attachments Attachments Attachments
SnowRemoval Removal Snow Attachments Attachments
· Added more patches TYPE for durability and strength PIPING TYPE – Weld on side cutter design for Protection and material management
· Diamond folded section for greater structural strength
– Diamond folded section Wear plate for extra strength
– Diamond folded section Wear plate for extra strength
· Overlapping plate for protecting Lip plate and increasing strength.
– Wear pads and bottom section
– Wear pads and bottom section
· Quick Coupler Friendly design.
– Muscle Pack Heels to increase durability and protect shell from wear
· Optimized Shape for better penetration and heel clearance
· High grade material composition for better durability – Used incredible Strength with lip plate using 500HBN
· Deep profile for High capacity
– Used incredible Strength with lip plate using 500HBN
· Low tip radius for greater digging performance
– Used higher Abrasion resistance using 400HBN
· Low tip radius for greater digging performance
– Used higher Abrasion resistance using 400HBN
WAY nd WAY
nd rdnd
SPOOL 2WAY WAY PIPING PIPING
2 SPOOL SPOOL 3 2SPOOL
nd nd
3
1
rd rd
ROTATING SPOOL 33rdrd SPOOL PIPING
WAY
ROTATING CLAMSHELL ROTATING PIPING PIPING PIPING
QUICK CLAMSHELL CLAMSHELL COUPLER PIPING PIPING PIPING
QUICK QUICK QUICK COUPLER COUPLER COUPLER PIPING PIPING
QUICK DIRECT QUICK COUPLER MOUNTING COUPLER
DIRECT DIRECT MOUNTING MOUNTING
1 WAY PIPING
ROTATING
WAY ROTATING ROTATING
21
WAY WAY WAY
WAY PIPING 2 WAY 11WAY PIPING PIPING
WAY WAY WAY
22 32 WAY nd WAY
nd
2 22WAY SPOOL WAY PIPING PIPING
WAY WAY
3
nd rd genuine Doosan SD tooth point for strength rdnd rd · Optimized designed
nd nd
2 SPOOL SPOOL 3 2SPOOL rd
ROTATING SPOOL 33rdrd SPOOL PIPING
Wear pads & straps Optimized wear pads positioning for enhancing wear resistance Added more patches by usage of bucket class.
· High grade material composition for better durability
· Deep profile for High capacity
22 32 rd
Attachments
500BHN, High abrasion resistant steel
1 WAY PIPING
ROTATING
· Optimized Shape for better penetration and heel clearance
WAY WAY
QUICK COUPLER PIPING
WAY
· 21 different models SPOOL SPOOL PIPING PIPING – 22-70 tons Models are available
tion rth moving th moving ments achments achments
1
Feature & Benefits
ROTATING
Forestry Demolition Forestry
Material Handling
High abrasion WAY WAY resistant ndsteel
rd
500BHN, High abrasion resistant steel
1 WAY PIPING
Quarry Forestry Quarry Mining &&Mining
Demolition Attachments
Strength and digging performance improved by positioning under side plate. Improved penetration by digging angle.
High strength steel
High strength steel
1
Earth moving Attachments
Arrangement of side plate, lip plate and tooth point
– Internal wear-strap kit using 400BHN · Additional Wear parts designed for ease of replacement during bucket
ROTATING CLAMSHELL ROTATING PIPING PIPING PIPING
QUICK CLAMSHELL CLAMSHELL COUPLER PIPING PIPING PIPING
QUICK QUICK QUICK COUPLER COUPLER COUPLER PIPING PIPING
QUICK DIRECT QUICK COUPLER MOUNTING COUPLER
DIRECT DIRECT MOUNTING MOUNTING
maintenance and protecting protect bucket structure from wear
H class
30 tons and below
H class
34 tons and above
S class
X class
Hydraulic Excavator
Designed and proven by the Doosan R&D Center
Doosan GET Portfolio
Doosan UNIQUE GEt SYSTEM
GD (General Duty) for G class bucket
Classification
Adapter Tooth IC Code
Part No.
5 ton 8 ton 14~17 ton 18~25 ton 30 ton 34~38 ton 42 ton 50 ton
Tooth Part No.
Length (mm)
Weight (kg)
GD (General Duty) Tooth
430203-00034
1
230111-00080
140
1.17
430203-00035
2
230111-00081
181
2.97
430203-00022
3
230111-00082
205
3.82
General Construction bucket.
430203-00023
4
230111-00084
230
4.89
Suitable for machines ranging from 14 to 70 tons.
430203-00024
5
230111-00083
260
6.92
Recommended for general construction
430203-00036
6
230111-00085
290
9.67
430203-00036
6
230111-00085
290
9.67
and utility loading applications.
430203-00048
7
230111-00087
325
14.56
Key Feature & Benefits Key Characteristics
Optimized design for Doosan’s GP and the new
A
Part No.
14~17 ton 18~25 ton 30 ton 34~38 ton 42 ton 50 ton 70 ton
Part No.
B
Length (mm)
3
230111-00089
217
4.17
430203-00024
5
230111-00090
265
7.65
430203-00024
5
230111-00090
265
7.65
430203-00036
6
230111-00092
315
12.27
430203-00036
6
230111-00092
315
12.27
430203-00037
7
230111-00093
361
19.87
430203-00038
8
230111-00094
390
24.8
·H igh abrasion resistant material for extra durability. (HD/SD)
Length(mm)
Current GD Tooth
Test start
Weight (kg)
430203-00022
· Highly suitable for ground leveling ·B etter digging action due to application of grooves on both sides · Ideal for clean-out-utility work
New HD Tooth
Worn out
Over 50% Last Longer
SD (Severe Duty) for S/X class bucket
Classification
Adapter
18~25 ton 30 ton 34~38 ton 42 ton 50 ton 70 ton
Classification 5 ton 8 ton 14~17 ton 18~25 ton 30 ton 34~38 ton 42 ton 50 ton 70 ton
Part No.
Length (mm)
Weight (kg)
430203-00049
5
230111-00124
275
9.39
430203-00036
6
230111-00104
325
14.09
430203-00037
7
230111-00106
365
20.4
430203-00037
7
230111-00106
365
430203-00037
7
230111-00106
365
430203-00038
8
230111-00107
400
28.86
HD (Heavy Duty) Tooth
SD (Severe Duty) Tooth
20.4
Optimized design for the Heavy Construction bucket.
Optimized design for the Severe Mining bucket and the
20.4
Suitable for machines ranging from 14 to 70 tons.
Xtreme Mining bucket. Suitable for machines
Recommended for most applications
ranging 22 to 70 tons.
including excavating, trenching,
Recommended for extremely
loading and medium density
tough quarries and mining
quarries and mining.
application.
General GET Tooth IC Code
Operating Hours
Tooth Tooth IC Code
Part No.
resistance to wear and corrosion.
C
·D esigned to maintain a uniform wear pattern throughout entire lifespan
Tooth Tooth IC Code
· Durability has been increased by 50% compared with the previous · A ppropriate steel alloys ensure strength, toughness, and · Robust design and high strength quality castings.
A
Adapter
C
model by modifying its shape and mechanical properties.
HD (Heavy Duty) for H class Bucket
Classification
B
1. Increased life span
Current GD
VS
New HD
Pin
Locking Washer
1
2705-9005
2705-9006
2
2705-6012
2705-6013
3
2705-1022
2114-1859
4
2705-1020
2114-1848A
wear due to their unique design for improved penetrative power
5
2705-1021
2114-1849A
· Reduced digging force and enhanced penetration due to optimum
6
2705-1021
2114-1849A
6
705-00006
114-00246
7
2705-1034
2114-1931
8
K1052231
K1052892
2. Better penetration performance · Self-sharpening tooth – The new Hd/S tooth is sharpened as they
body shape and angle in simulation Key Characteristics
Key Characteristics 3. Excellent GET economics
* Tooth IC code: Tooth Interchangeability Code – Tooth can be interchangeable with same number
· Greater lifespan and durability means fewer replacements · New tooth is interchangeable with the old type · Low initial investment · Center-convex and corn shape · thicker front-end and great work volume
·S elf-sharpening design, minimal unnecessary contact with materials
·H igher center-convex and rounded shape · S elf-sharpening design delivers better · T hickest front-end for maximum lifespan penetration throughout entire product during rock abrasion lifespan
UP
50 %
Doosan Bucket Portfolio
Doosan Bucket Portfolio G class Classification
5 ton 8 ton
14 ton
18 ton
22 ton
30 ton
34 ton
42 ton
50 ton
Part No.
Size (mm/inch)
230104-01854 230104-01856
3
30
0.59 / 0.77
1,125 / 44.29 1,300 / 51.18
S class
Capacity (m3/yd3)
Rip plate (mm)
* Tooth IC Code
450 / 17.71
0.212 / 0.277
30
3
600 / 23.62
0.312 / 0.408
30
3
230104-01858
750 / 29.52
0.416 / 0.544
30
3
3
230104-01860
900 / 35.43
0.523 / 0.684
30
3
30
3
230104-01862
1,000 / 39.36
0.595 / 0.778
30
3
0.64 / 0.84
30
3
230104-01864
1,100 / 43.30
0.668 / 0.873
30
3
0.76 / 1.00
30
3
230104-01866
1,200 / 47.24
0.740 / 0.967
30
3
230104-01871
750 / 29.52
0.513 / 0.670
40
5
Part No.
Size (mm/inch)
Capacity (m3/yd3)
Rip plate (mm)
* Tooth IC Code
230104-02066
336 / 13.23
0.07 / 0.09
20
1
230104-02068
678 / 26.69
0.18 / 0.23
20
1
230104-02070
724 / 28.50
0.19 / 0.25
20
1
230104-02072
572 / 22.52
0.20 / 0.16
25
2
230104-02074
746 / 29.37
0.28 / 0.22
25
2
230104-02077
757 / 29.80
0.39 / 0.51
30
3
230104-02079
847 / 33.35
0.45 / 0.59
30
230104-02081
935 / 36.81
0.51 / 0.67
230104-02083
1,052 / 41.42
230104-02085 230104-02087
Part No.
Size (mm/inch)
X class
Capacity (m3/yd3)
Rip plate (mm)
* Tooth IC Code
230104-02089
995 / 39.17
0.70 / 0.92
36
4
230104-01873
900 / 35.43
0.645 / 0.843
40
5
230104-02092
1,062 / 41.81
0.76 / 0.99
36
4
230104-01875
1,050 / 41.33
0.779 / 1.018
40
5
230104-02094
1,107 / 43.58
0.80 / 1.05
36
4
230104-01878
1,100 / 43.30
0.824 / 1.077
40
5
230104-02096
1,253 / 49.33
0.93 / 1.22
36
4
230104-01880
1,200 / 47.24
0.914 / 1.195
40
5
230104-02098
1,011 / 39.80
0.81 / 1.06
36
4
230104-01715
750 / 30
0.60 / 0.79
40
5
230104-02100
1,060 / 41.73
0.86 / 1.12
36
4
230104-01724
900 / 35
0.76 / 0.99
40
5
230104-02102
1,119 / 44.06
0.92 / 1.20
36
4
230104-01726
1,050 / 41
0.92 / 1.20
40
5
230104-01986
1,050 / 41.34
0.91 / 1.19
50
5
230104-02104
1,245 / 49.02
1.05 / 1.37
36
4
230104-01728
1,200 / 47
1.08 / 1.41
40
5
230104-02003
1,200 / 47.24
1.07 / 1.40
50
5
230104-02106
1,294 / 50.94
1.10 / 1.44
36
4
230104-01730
1,350 / 53
1.24 / 1.62
40
5
230104-02005
1,350 / 53.15
1.23 / 1.61
50
5
230104-02108
1,362 / 53.62
1.17 / 1.53
36
4
230104-01732
1,450 / 57
1.35 / 1.76
40
5
230104-02110
1,468 / 57.80
1.28 / 1.67
36
4
230104-01734
1,500 / 59
1.40 / 1.83
40
5
230104-01736
1,600 / 63
1.51 / 1.97
40
5
1.04 / 1.36
40
5
230104-02114
1,129 / 44.45
1.03 / 1.35
40
5
230104-01738
1,050 / 41
230104-02116
1,340 / 52.76
1.27 / 1.66
40
5
230104-01740
1,200 / 47
1.23 / 1.60
40
5
230104-01988
1,200 / 47.24
1.20 / 1.57
50
6
230104-02118
1,550 / 61.02
1.51 / 1.98
40
5
230104-01742
1,400 / 55
1.47 / 1.92
40
5
230104-02007
1,400 / 55.12
1.45 / 1.89
50
6
230104-01744
1,500 / 59
1.60 / 2.09
40
5
230104-02009
1,500 / 59.06
1.57 / 2.05
50
6
230104-02120
1,760 / 69.29
1.75 / 2.29
40
5
230104-01746
1,600 / 63
1.72 / 2.25
40
5
Part No.
Size (mm/inch)
Capacity (m3/yd3)
Rip plate (mm)
* Tooth IC Code
230104-02122
1,410 / 55.51
1.49 / 1.95
50
6
230104-01888
1,200 / 47.24
1.443 / 1.887
50
6
230104-02124
1,505 / 59.25
1.61 / 2.11
50
6
230104-01900
1,350 / 53.14
1.661 / 2.173
50
6
230104-01990
1,350 / 53.14
1.559 / 2.039
60
7
230104-02167
1,350 / 53.14
1.56 / 2.04
60
7
230104-02126
1,680 / 66.14
1.83 / 2.39
50
6
230104-02052
1,450 / 57.09
1.81 / 2.36
50
6
230104-02138
1,450 / 57.09
1.71 / 2.23
60
7
230104-02169
1,450 / 57.09
1.71 / 2.23
60
7
230104-02054
1,600 / 62.99
2.03 / 2.65
50
6
230104-02139
1,600 / 62.99
1.92 / 2.52
60
7
230104-02015
1,800 / 70.86
2.217 / 2.900
60
7 230104-02171
1,350 / 53.15
1.77 / 2.32
60
7
230104-01906
1,800 / 70.86
2.319 / 3.034
50
6
230104-01890
1,200 / 47.24
1.638 / 2.142
50
6
230104-02126
1,493 / 58.78
1.90 / 2.45
50
6
230104-01893
1,350 / 53.14
1.921 / 2.512
50
6
230104-01992
1,350 / 53.15
1.77 / 2.32
60
7
230104-02130
1,667 / 65.63
2.16 / 2.83
50
6
230104-01895
1,500 / 59.05
2.138 / 2.797
50
6
230104-02017
1,500 / 59.06
2.02 / 2.64
60
7
230104-01898
1,700 / 66.92
2.473 / 3.235
50
6
230104-01801
1,200 / 47
1.80 / 2.35
60
7
230104-02132
1,587 / 62.48
2.14 / 2.80
50
7
230104-01804
1,350 / 53
2.07 / 2.71
60
7
230104-01994
1,350 / 53.15
1.94 / 2.54
60
7
230104-02173
1,350 / 53.15
1.94 / 2.54
60
7
230104-02134
1,746 / 68.74
2.39 / 3.13
50
7
230104-01806
1,500 / 59
2.35 / 3.08
60
7
230104-02019
1,500 / 59.06
2.22 / 2.91
60
7
230104-02175
1,500 / 59.06
2.22 / 2.91
60
7
230104-01808
1,700 / 67
2.72 / 3.56
60
7
230104-02021
1,700 / 66.93
2.53 / 3.39
60
7
230104-02177
1,700 / 66.93
2.59 / 3.39
60
7
230104-01810
1,800 / 70
2.91 / 3.80
60
7
230104-02023
1,800 / 70.87
2.78 / 3.63
60
7
230104-02179
1,800 / 70.87
2.78 / 3.63
60
7
230104-01812
2,000 / 79
3.28 / 4.29
60
7
230104-02025
2,000 / 78.74
3.15 / 4.12
60
7
230104-01926
1,500 / 59.05
2.923 / 3.824
70
8
230104-01928
1,700 / 66.92
3.424 / 4.478
70
8
230104-01930
1,800 / 70.86
3.676 / 4.808
70
8 230104-01996
1,600 / 62.99
3.75 / 4.90
70
8
230104-02181
1,600 / 62.99
3.75 / 4.90
70
8
230104-01932
1,700 / 66.92
4.045 / 5.291
70
8
230104-02027
1,700 / 66.93
4.05 / 5.29
70
8
230104-02183
1,700 / 66.93
4.05 / 5.29
70
8
230104-01934
2,100 / 82.67
4.433 / 5.798
70
8
230104-01937
1,900 / 74.80
4.640 / 6.069
70
8
230104-02029
1,900 / 74.80
4.64 / 6.07
70
8
230104-02185
1,900 / 74.80
4.64 / 6.07
70
8
230104-01939
2,100 / 82.67
5.237 / 6.850
70
8
230104-02031
2,100 / 82.68
5.24 / 6.85
70
8
230104-02187
2,100 / 82.68
5.24 / 6.85
70
8
230104-02136
70 ton
H class
2,043 / 80.43
2.86 / 3.74
50
7
Bucket
Hydraulic Breaker
Fixed Pulverizer
Rotating Crusher
Multi-processor
STEEL SHEAR
Multi-Grapple
Stone Grapple
Wood Grapple
Log Grapple
Orange Grapple
Hydraulic Quick Coupler
Clamshell Bucket
Plate Compactor
Pile Driver
Ripper
Vibrating Ripper
Norway (Elnesvågen) Ireland (Slane)
Czech Republic (Dobris) France (Saint Priest)
China China (Yantai) (Shandong) Korea (Incheon & Gunsan) China (Suzhou) China (Shanghai)
USA (Gwinner) USA (Statesville)
Brazil (São Paulo)
Doosan worldwide factories Heavy Equipment Factory Compact Equipment Factory Attachment Factory