Esco Super V Bucket Teeth Type Introduction
SUPER V TEETH FOR EXCAVATOR
1. SYL
SYL means a standard tooth with a long Y-shaped rib for excavator buckets.
It is symmetrical design allows us to keep the profile always sharp for best penetration. The Y-shaped rib makes it a very robust product, with plenty of wear metal. It is the best choice for general application.
SYL
2. RYL
RYL is a tooth with Y-shaped rib for rocky grounds. This short tooth is most suitable for high-impact rock application where violent thrust.
RYL
3. SDX
SDX is a sharp Delta-shaped tooth. The chisel tip allows better penetration, while offering a more robust product and more wear metal than VY shape
SDX
4. VY (VYH)
VY is V-shaped tooth with a non-symmetrical Y-shaped rib. It is used when maximum penetration is needed, such as in frozen ground or argillite. It has a longer lifespan than teeth of other shapes and stays sharp for longer. The model VYH offers higher robustnesss than VY one.
VY(VYH)
5. TVY (TVYH)
TVY is Twin, V-shaped tooth, with non-symmertrical Y-shaped rib and excellent penetration capacity.
TVY(TVYH)
6. FLARED
Sunk and tapered tooth for cleaning jobs. Excellent for ditches and foundation work.
FLARED
TEETH FOR LOADERS
1. TYL
TYL is two-way tooth, with Y-shaped rib and a long tip. It is used for adherence to level ground in standard applications. The upper part can be rotated downwards for a more energetic digging. This is non-symmetrical shape.
TYL
2. AD
AD is Delta-shape FEL tooth for extremely abrassive applications requiring the maximum penetration. It is an optimum choice for quarry working condition.
AD
3. ADH
Robust shape.Specifically designed to be used on a quarry Loader. The wide wear shoe guarantees an even quarry floor and long wear 9 (only available in size V43)
ADH
4.AG
AG is a General Abrasion tooth, with a wide base to gurantee maximum strength in heavy-duty applications. Its slender ccontours offer very good penetration.
AG
5.ARH
ARH has been specifically developed for abrasive applications such as the handling of Hot Slag.ARH has a sturdy base, thicker cavity wall for better adherence to the nose even in the most demanding applications. It can be used in a range of applications, apart from the handling of hot slag, requiring a higher amount of wear metal. Super V Bucket Teeth Type
ARH
V21SYL 21SYL Esco Helilok Tooth
25S Esco Conical Style Bucket Tooth
ESCO 3807-30, 4188013 Hitachi Excavator Adapter ZX120, EX100
ESCO 22S 4621685 Adapter for Hitachi Excavator
V39-50 / 5896-V39Z ESCO Style Welded Adapter
3829-18 Esco 18 Series Style Single Strap Adapter
3895-V18 ESCO Style Super V V18 Weld On Teeth Adaptors
