EXCAVATOR BASE EDGES AND BLADES
Heat treated (thru-hardened) weld-on base edges are available for all OEM* equipment, with or without holes to suit whichever wear parts are required.
Corresponding replacement bolt-on heat treated (thru-hardened) blades are available with or without a scarifying “sawtooth” edge profile.
We Manufacture High strength of cutting edge for excavator and loader bucket
Charactaristics of our cutting edge
◆ Single or Double bevel flat edge
◆ All edge heat treated
◆ Full range of bolt-on or weld-on
◆ Ahalf arrow edge
◆ VCE500 harness value from HB440-HB500
◆ VCE400 harness value from HB350-HB400
Material: 30MnB or 28SiTiB
Applications: thickness less than 80mm buckets of all brands of excavartors
Usage: After market bucket repairing, earthmoving euipment maintenance, bucket manufacturing
Design type: bevel angle lip & right angle lip
Bucket Base Edge
Specifications:
width 100mm-500mm
length 300mm-2500mm
Thinkness – Bucket teeth matching
22MM-J225
32MM-J250
35MM-J300 or K80
40MM-J350 or K90
45MM-J400 or K100
60MM-J460 or K110
70MM-J550 or K130
80MM-J600 or K150 90MM-J700 or K170
Some codes of parts reference:
086-0814 086-0813 085-9510 086-0809 086-0812 086-0811 5W7957 8U2639 7Y6601
127-2317127-2290 232-2923 227-8203 129-1540 135-8636 129-5715 135-8637 5V0166 8K0668 7I6713
100-4150 8R2662 135-3165 135-3167 119-3174 6I5303 100-6198 108-1066 137-4104
137-4101 9C3955 135-3164 232-2924 135-3163 127-2317
Weld On Heavy Duty Excavator Lip Protection WLS4003024
Casting Alloy Gum Protector 50-75mm
195-78-71111, 1957871111 KOMATSU D375 Standard 2-Pin Protector
WE5966 ESCO Lip Shroud for Loader
D375 Komatsu Sidebar Protector 195-78-71111, 1957871111