Identify Your Bucket Teeth

Identify Your Bucket Teeth

Identify Your Bucket Teeth

Fill in this CONTACT US to identify your bucket teeth.
Customers commonly ask for assistance in identifying their bucket teeth so they can order replacements parts.

By filling in the form below, we can easily identify which bucket teeth parts you are using and whether they are suitable for your digging conditions. See the additional instructions for more info.

Additional instructions
Finding your part numbers
Your bucket tooth part number will usually be found on the top, side or base of the tooth. Cutting Edges’ and OEM part numbers usually correspond.

Knowing your pin locking system
The pin will usually go through either the side of the tooth base, or the top of the tooth base, and by identifying which it is, we can further narrow down the possible range of bucket tooth parts you are using.

Measurements & photos
Key measurements we use are the width x height (mm) of the box section of the tooth, from the outside of the base. Photos from different angles will also be a great help.

The bucket teeth of the excavator can be said to be a part that the machine friends love and hate. On the one hand, the bucket teeth are the pioneer of the bucket, and they are invincible for the excavator to shovel, rock and dig trenches. On the other hand, the bucket teeth wear out quickly, the replacement frequency is high, and the increase in cost makes the diggers heartbroken!

During excavation, the straight-mounted tooth pin will be exposed to the squeezing force of the excavated material on the front. If the digging force is large, the clamping force of the expansion spring cannot meet the requirements, and it is easy to cause the tooth pin to fall off. Used in excavators with smaller excavators and lower tonnage.

Penetration
Wear  CAT315 320 J350 Excavator Corner Adapter LH 6I6356
Impact
Penetration
Wear  Carterpillar 114-0464 Casting Bucket Adapter Center
Impact
Penetration
Wear  CAT Loader 119-8604 Two Strap Adapter Centre
Impact
Penetration
Wear  4T4706, 1711706 J700 Corner Adapter LH
Impact
Penetration
Wear  CAT 119-8605, 1198605 Weld-On Wheel Loader Bucket Adaptor
Impact
Penetration
Wear
Impact  171-1704, 1711704 J700 WHEEL-TYPE LOADER 992G Adapter
Penetration
Wear
Impact
Penetration  6I8804 J800 Bucket Adapter for CAT Excavator 375 385B
Wear
Impact

error: Content is protected !!