Bulldozer Rippers

Bulldozer Rippers – A ripper’ is a long, claw-like shank that may be mounted singly or in multiples on the rear of a bulldozer to loosen hard and impacted materials. Usually a single shank is preferred for heavy ripping. The ripper is fitted with a replaceable tungsten steel alloy tip, referred to as a boot. Bulldozer Rippers

Ripping can not only loosen soil (such as podzol hardpan) in agricultural and construction applications but break shaly rock or pavement into easily handled small rubble.

A variant of the ripper is the stumpbuster, a single spike protruding horizontally used to split a tree stump.

Product name Ripper For Bulldozer
Product material Q345B+NM400 or customized
Color yellow or customized
Unit weight about 50-1200kgs
Bulldozer ripper shanks no. 3 shanks with teeth,4 shanks with teeth,single shanks with teeth
Ripper cylinder no. Single cylinder
Ripper pins material 40Cr with galvanized surface treatment
Ripper package wooden or steel pallet
Ripper origin made in China

According to the tooth amount, the bulldozer ripper also can be divided into single shank ripper and multitooth ripper(2-5 teeth).

Ripper Shanks & Attachments for Bulldozer
Ripper Shanks & Attachments for Bulldozer

As to the single shank ripper, it is very stong to dig the earth, it can be used for digging the hard soil, frozen soil, soft rock, mantle of rock and cracked rock, it also can remove the root of the trees and other barries. Multitooth ripper is mainly used for loosening the thin hard soil and frozen soil, so that can improve the efficiency.

Materials
Made of high strength steel plate, easy to install, easy to use.

Ripper Teeth
Installed with high strength ripper teeth which is most famous in domestic, strong digging capacity.

Ripper Protector Guard
Ripper protector guard for bulldozer, single shank guard multipule shank guard, Deep ripper shank guard, standard pin-on.

Oil Cylinder
Bulldozer rippers have powerful oil cylinder, make work more smoothly.

The Dozer Ripper makes separating rock, heavily compacted soil, or frozen ground easy. After ripping, the material can be easily handled and removed so grading & dozing can begin.
Our three-shank design features rapid ground penetration and an aggressive ripping angle at any depth. Standard features such as heavy duty cylinders, replaceable hardened bushings, and reinforced shank pockets ensure years of trouble-free operation.

Rip rock, soil, and frozen ground with ease!
• Your choice of the 3 shank dozer ripper or 5 shanks dozer ripper.
• Parallelogram or variable pitch dozer ripper designs available.
• Rapid ground penetration and aggressive ripping angle at any depth!
• Replaceable hardened bushings and bulldozer ripper shank pockets ensure years of trouble-free operation for any application.

TypeMaterialSpecification
Single shank ripperHigh-strength wearable steel plate, such asQ345, Q460, WH60, NM400, Hardox400.

Or as per your different requirements or drawings

It is used for digging hard soil, frozen soil, soft rock, weathered rock and cracked rock. It also can remove the root of the
trees and other barriers.
Multi tooth ripperIt is mainly used for loosening thin hard soil and frozen soil, so that it can improve the efficiency.

NBSJ’s GET Parts and Attachments have the full range of Bulldozer Ripper Shanks available in stock, fitting CAT, Komatsu, John Deere, Hitachi, Volvo, Doosan and Case bulldozers.

error: Our Bucket Teeth & Adapters Content is protected !