197-8832 Timer Hour Meter For CAT 345C 631D 637D 3508 3512 3516

Specification:
Part No.  197-8832, 1978832
Weight   0.18 KGS
Brand Name   OEM AVAIABLE
Replacement Brand  Caterpillar , CAT

 

REQUEST FOR PARTS QUOTE

197-8832 Timer Hour Meter For CAT 345C 631D 637D 3508 3512 3516, Engine Excavator Spare Parts, Round Digital Hourmeter Gauge, Hour Meter Timer Relay, Electronic Round Type Meter Gp Service, Caterpillar Hourmeter, CAT Style Spare Part METER-HOUR, Replacement Caterpillar Meter, Tachometer Assembly, ELECTRONIC Indicator Assembly, CAT Basic Service Meter Assembly, China Factory GET Spare Parts Wear Parts Supplier

197-8832 Timer Hour Meter For CAT 345C 631D 637D 3508 3512 3516, Replacement Aftermarket OEM Parts  197-8832, 1978832 Hour Meter Suitable for Excavator, Loader, Backhoe, Dozer, Bulldozer. Buy Digital Hourmeter Gauge Electronics Gauges CAT genuine, new spare parts with delivery, aftermarket, replacement and not original Caterpillar.

Compatible equipment models: 1978832:
EXCAVATOR 345C
GAS ENGINE G3406
GENERATOR SET G3516
INDUSTRIAL ENGINE 3406C 3508 3512 3516
PETROLEUM ENGINE C32
PETROLEUM TRANSMISSION TH48-E70
PNEUMATIC COMPACTOR PS-150B PS-200B
TRACK LOADER 933C 939C
TRACK-TYPE TRACTOR D3C III D4C III D5C III
WHEEL SCRAPER 637D 657B
WHEEL TRACTOR 631D 637D 651B 651E 657E
WHEELED EXCAVATOR M313D M315D M316D M318D M318D MH M322D M322D MH Caterpillar

COMPATIBLE MODELS FOR PART NUMBER 197-8832
GENERATOR
SR4B SR4 SR4BHV
PETROLEUM PRODUCTS
3508 3512C C32
WHEEL-TYPE LOADER
990 II
ENGINE – INDUSTRIAL
3406C 3508 3512 3512B 3516 G3508 G3512 G3516 3508C
WHEEL TRACTOR-SCRAPER
657E
MARINE PRODUCTS
3508 3516
EXCAVATOR
325C 330C L 345C
ENGINE – GENERATOR SET
PM3512 PM3516

The following materials are needed to program the voltage regulator with Cat ET :
CDVR
Cat ET Software
24 VDC control power to the voltage regulator
IBM compatible PC with serial port, 486DX2, or faster (100 MHz or higher microprocessor is recommended)
Communication Adapter IIFollow the steps below in order to program the voltage regulator with Cat ET:
Apply 24 VDC control power to the voltage regulator.
Connect the “Communication Adapter II” module between the computer and the primary “CANbus” port and start the Cat ET software. Select the appropriate communication port, if prompted. 366-0367 Caterpillar Timer Hour Meter w/ Remote Control Panel
Dialog that shows the number of electronic control modules that have been detected
Wait for the software to recognize the electronic control modules. Refer to Illustration 1.
Illustration 2 g01112560  285-9075 Caterpillar Timer Control Panel Gauge Indicator
If the software does not automatically connect, click the “CONNECT” button at the top of the screen as shown in illustration 2.
Configuration tool
The “Service” menu contains a drop-down menu containing the “Configuration Tool” button as shown in illustration 3. Click on the “Configuration Tool” button. Select the CDVR from the list by clicking CDVR once.
Illustration 4 g01113076  366-0367 3660367 Hour Timer Meter for 320D 329D 326D Excavator
Available electronic control modules
Verify that the CDVR is listed in the left panel under “AVAILABLE ECM(S)” as shown in illustration 4.
366-0367 Time Remote Hour Meter With Control Timer Engine Excavator Spare Parts
Configuration group
Select the configuration group that is to be viewed by clicking the group in the left panel. Refer to illustration 5. If necessary, expand the CDVR folder in the left panel by clicking the “+” symbol next to the CDVR label. The various parameters to be programmed or viewed in that particular configuration group become visible in the right panel.
Parameter selection
In order to program a parameter, double click that parameter in the right panel or highlight the parameter by single clicking the parameter, then press “ENTER”.
CATERPILLAR 366-0367 SERVICE METER KIT
Change parameter value
Type the new value or select a new value from the drop-down menu if the “CHANGE PARAMETER VALUE” window is available. Click on “OK”. Click on “YES” in order to confirm. Refer to illustration 7.
Repeat Steps 7 through 9 for each parameter to be programmed.

error: Content is protected !!