366-0367 Time Remote Hour Meter With Control Timer Engine Excavator Spare Parts

Specification:
Part No.    366-0367, 3660367
Weight   0.085 KGS
Brand Name   OEM AVAIABLE
Replacement Brand  Caterpillar , CAT

 

REQUEST FOR PARTS QUOTE

366-0367 Time Remote Hour Meter With Control Timer Engine Excavator Spare Parts, Round Digital Hourmeter Gauge, Hour Meter Timer Relay, Electronic Round Type Meter Gp Service, Caterpillar Hourmeter, CAT Style Spare Part METER-HOUR, Replacement Caterpillar Meter, Tachometer Assembly, ELECTRONIC Indicator Assembly, CAT Basic Service Meter Assembly, China Factory GET Spare Parts Wear Parts Supplier

366-0367 Time Remote Hour Meter With Control Timer Engine Excavator Spare Parts , Replacement Aftermarket OEM Parts  366-0367, 3660367  Hour Meter Suitable for Excavator, Loader, Backhoe, Dozer, Bulldozer. Buy Digital Hourmeter Gauge Electronics Gauges CAT genuine, new spare parts with delivery, aftermarket, replacement and not original Caterpillar.

COMPATIBLE MODELS FOR PART NUMBER 366-0367
MINI HYDRAULIC EXCAVATOR
303E CR 303ECR
WHEEL TRACTOR-SCRAPER
631E 637E
MARINE PRODUCTS
3612 3616 C280-12 C280-16 C280-6 C280-8
EXCAVATOR
313D2 311F LRR 312D2 312D2 GC 312D2 L 313D2 LGP 318D2 L 320D2 320D2 GC 320D2 L 323D2 L 326D2 326D2 L 329D2 329D2 L 330D2 L
ENGINE – GENERATOR SET
3606 3608 3612 3616

EXCAVATOR 311F LRR 323D2 L 568 FM LL
MINI HYD EXCAVATOR 308E2 CR
TRACK-TYPE TRACTOR D10N Caterpillar

Part Number: 366-0367 3660367 197-8832 1978832 161-3932 1613932
Application: For Cat Excavator 320D E320D
Specification:
Color: Black
Material: Metal
Package Including: 1x Timer Meter

The following materials are needed to program the voltage regulator with Cat ET :
CDVR
Cat ET Software
24 VDC control power to the voltage regulator
IBM compatible PC with serial port, 486DX2, or faster (100 MHz or higher microprocessor is recommended)
Communication Adapter IIFollow the steps below in order to program the voltage regulator with Cat ET:
Apply 24 VDC control power to the voltage regulator.
Connect the “Communication Adapter II” module between the computer and the primary “CANbus” port and start the Cat ET software. Select the appropriate communication port, if prompted.
Illustration 1 g01112515
Dialog that shows the number of electronic control modules that have been detected
Wait for the software to recognize the electronic control modules. Refer to Illustration 1.
Illustration 2 g01112560  285-9075 Caterpillar Timer Control Panel Gauge Indicator
Connect button
If the software does not automatically connect, click the “CONNECT” button at the top of the screen as shown in illustration 2.
Illustration 3 g01113063
Configuration tool
The “Service” menu contains a drop-down menu containing the “Configuration Tool” button as shown in illustration 3. Click on the “Configuration Tool” button. Select the CDVR from the list by clicking CDVR once.
Illustration 4 g01113076
Available electronic control modules
Verify that the CDVR is listed in the left panel under “AVAILABLE ECM(S)” as shown in illustration 4.
Illustration 5 g01113082
Configuration group
Select the configuration group that is to be viewed by clicking the group in the left panel. Refer to illustration 5. If necessary, expand the CDVR folder in the left panel by clicking the “+” symbol next to the CDVR label. The various parameters to be programmed or viewed in that particular configuration group become visible in the right panel.
Illustration 6 g01113121
Parameter selection
In order to program a parameter, double click that parameter in the right panel or highlight the parameter by single clicking the parameter, then press “ENTER”. Refer to illustration 6.
Illustration 7 g01113102
Change parameter value
Type the new value or select a new value from the drop-down menu if the “CHANGE PARAMETER VALUE” window is available. Click on “OK”. Click on “YES” in order to confirm. Refer to illustration 7.
Repeat Steps 7 through 9 for each parameter to be programmed.
Illustration 8 g01113109
Disconnect button
In order to disconnect communication, click the “DISCONNECT” button. Refer to Illustration 8. Viewing Metering Parameters Using Cat ET Software
The following items are needed to view metering parameters in the CDVR with Cat ET:

error: Content is protected !!