4T3015 4T-3015 CAT 980 973 Loader End Cutting Edge

Specification:
Part No. 4T3015, 4T-3015
Weight    21 Kg
Brand Name   OEM AVAIABLE
Replacement Brand  Caterpillar (CAT)

 

REQUEST FOR PARTS QUOTE

4T3015 4T-3015 CAT 980 973 Loader End Cutting Edge, CAT Bolt-on Cutting Edge Segment, Segment Edge Protection 30mm, BOLT ON LOADER SEGMENT, Caterpillar LOADER END BIT, 950G 950G II 950H 950K 950L Loader End Edges, Replaceable Bolt On Cutting Edge and End Bit, Replacement CAT style Wheel Loader Edge, Double beveled reversible DBF bucket blade, CAT Wear Spare Parts China Supplier

4T3015 4T-3015 CAT 980 973 Loader End Cutting Edge, Replacement Aftermarket OEM Parts  4T3015, 4T-3015 Bucket Cutting Edge Suitable for Loader, Backhoe, Buy Blade & End Bit CAT genuine, new parts with delivery, aftermarket, replacement and not original Caterpillar .

4T-3015 BLADE SEGMENT CTR 30 X 360 X 256 980 973
WEIGHT
21kg
DIMENSION
30
PROFILE
two
WIDTH
360
LENGTH
256

COMPATIBLE MODELS FOR PART NUMBER 4T3015
WHEEL-TYPE LOADER
950G 950G II 950H 950K 950L 950M 962G 962G II 962H 962K 962L 962M 966M XE 980C

Replacement Cutting Edges
We stock and supply high wear cutting edges for the following types of machinery:
Loaders
Scrapers
Dozers
Excavators
Tractors
Skid Steers
& More..

We stock common edges for OEM manufacturers including:
CAT
Komatsu
Volvo
Deere
Case
Bobcat
Hyundai
& More..

Some of our common stock edges include:

Grader Blades
Cleanup Edges
Half Arrow
Router Bits
Hot Cupped End Bits
End Bits
& More…

We stock and are able to build for any specific bucket manufacturer: Accurate, Craig, Weldco Beales, CWS, AMI, HNL, Lemac, Daequip, and any others!

Illustration 1. The new valve stem seal assemblies with the new spring retainers now used on the inlet and exhaust valves.The former seal formed only an “umbrella” over the end of the valve stem guide. The former seal was not retained and thus it could slide up and down with the valve and become ineffective. The new seal seats directly on the head, and is held in this position by the force of the valve spring. 257-1762 RIGHT & LEFT HAND BLADE END SEGMENT
As an interim change, the new spring retainer was used with the FORMER seal. Since the new retainer was designed for use with the new seal that has a flange under the spring, a 9Y7355 Seat (Spacer) is required to maintain the same compressed spring length on these interim engines. See Illustration 2. Caterpillar 263-7545 LAODER SEGMENT RIGHT & LEFT
Illustration 2. The interim change where the new retainers are used with the separate spring seats on both valves, but the former seal was still used only on the inlet valve as shown.Adaptable To: The new spring retainers and the interim 9Y7355 Seats are effective with: (interim engines) 3114 Ind. Engine: 5EF482, 1ZG (not available)3114 Standby Generator Set Engine: 6AF4703114 Generator Set Engine: 5JG4733116 Ind. Engine: 2WG546, 4PG (not available)3116 Standby Generator Set Engine: 2SG6433116 Generator Set Engine: 1NJ5763114, 3116 Cat Vehicular Engines (not available) The new seals are effective with: Caterpillar Wheel Loader Edge 308-3054, 3083054
3114 Ind. Engine: 5EF617, 1ZG (not available)3114 Standby Generator Set Engine: 6AF5283114 Generator Set Engine: 5JG6453116 Ind. Engine: 2WG766, 4PG (not available)3116 Standby Generator Set Engine: 2SG7813116 Generator Set Engine: 1NJ7903114, 3116 Cat Vehicular Engines (not available)On the interim engines, the new 9Y8847 Seal Assembly can be installed in place of the former 7C7448 Seal and the 9Y7355 Seat. Do not use the seat if the new seal is used. The new 9Y7356 Retainers already on these engines can be reused.  140-7601, 1407601 CAT STYLE Loader 950G II 950H 950K Segment
For the earlier engines that are using both the former retainer and former seal, replace these parts with the new 9Y7356 Retainers and new 9Y8847 Seal Assemblies. See Illustration 1. Do not use the 9Y7355 Seat.

error: Content is protected !!