Caterpillar Penetration Tip 1U3209 Aftermarket, J200 CAT Backhoe Tooth, Digging Penetrator Rock Teeth Point, J200 Excavator Side Pin Bucket Tooth, Replacement CAT Digger Backhoe Loader tooth adapter point system, GET Wear Spare Parts China Supplier
Caterpillar Penetration Tip 1U3209 Aftermarket, Casting & Forging Replacement Aftermarket OEM Parts J200 Bucket Tooth Suitable for Excavators, Backhoe Loaders, Buy TOOTH Penetration Caterpillar genuine, new aftermarket parts with delivery
1U3209 / 1U-3209 Bucket Teeth Caterpillar Style, Penetration Tip
Uses Pin# 8E6208
Uses Lock# 8E6209
NOTE: Caterpillar Style Aftermarket – Fits CAT equipment. This part may fit various machines.
Quality & Service You Can Trust!
-Our products are manufactured to meet or exceed OEM specifications.
-We ONLY sell Quality, Reliable and Guaranteed products!
Pocket dimensions (W x H): Warehouse
Style: Penetration
Suits nose: 1193205
Machine size: 3-6 tonne
Pin hole: 13mm
Pin size: 11 x 61 mm
Pin location: Side
OEM: CAT
Machine type: Skid steer / Excavator
Weight: 1.0 kg
Pin: 8E6208
Retainer: 8E6209
Common names: Ripper, Boot, Tip
MACHINE SIZE:4-6 TON
J-SERIES PINS:
8E6208 J200 CAT J-Series Pin
J-SERIES KEEPERS:
8E6209 J200 CAT J-Series Keeper
J-SERIES ADAPTERS:
1193204 CAT Style Weld On Center Double Strap Adapter
1193205 CAT Style Weld On Center Double Strap Adapter
4T1204 CAT Style Flush Mounted Adapter
Wear life of excavator teeth are impacted differently by various materials. Sand is extremely abrasive, rock, dirt and other materials being excavated or loaded will impact on its wear life depending on their quartz content. The greater the wear surface, the longer the teeth will last before replacement. OEM Replacement Caterpillar Digger Teeth Engaging Tools, CAT J200 Tips J200 1U3209 CAT Backhoe Tooth
Category Material Tensile Yield Elongation Hardness Impact
Teeth SZ Series >=1700Mpa >=1500Mpa 8% HB 440–520 >=21J
Adapter SZ Series >=1400Mpa >=1200Mpa 9% HB 380–400 >=22J
Sider Cutter SZ Series >=1700Mpa >=1500Mpa 8% HB 440–520 >=21J
Cutting Edge 30MnB >=1670Mpa >=1440Mpa 9% HB 440–520 >=29J
Cutting Edge HN8 >=1130Mpa >=600Mpa 7% HB 280–320 >=7J
End bit 30MnB >=1670Mpa >=1440Mpa 9% HB 440–520 >=29J , J800 Wheel Loader Abrasion Tip 6I-8803
End bit 16Mn >=670Mpa >=320Mpa 7% HB 280–320 >=21J
Power Bolt 40Cr HB 380–420
Power Bolt 45# HB 380–421
