DS14 Dredger Tooth System Made in China

Specification:
Part No.  DS14
Weight:     KGS
Processing: Precision Casting
Material: Wear Alloy Steel
Advantages: Perfect Fitting, Excellent Wear Life
Color: Grey/Black/Red etc.
Trade Mark: As Customer’s Request

 

REQUEST PARTS QUOTE

DS14 Dredger Tooth System Made in China, Dredging Wheel Vessels Teeth, Replaceable ESCO Dredger Pick Point Flare Cutter Teeth, Dredge Cutter Head Teeth, Dredging Tooth Systems, Marine Dredge Sand Cutter Teeth For Cutter Suction Dredger, wide chisel, flare point, chisel and pick point, ESCO VOSTA IHC Dredging Cutter Teeth, Reamer Teeth Rake Tooth, Replacement Draghead Teeth China GET Spare Parts Wear Parts Supplier

DS14 Dredger Tooth System Made in China

Dredge cutter tooth are specially designed for dredging. They are used for loosening hard surface materials like rock or gravel from the sea or river bed. Different types of dredge cutter teeth are used in different situations. Wide chisels are used for peat, sand and soft clay. Narrow chisels are applied in packed sand and firm clay. And tooth with pick points are used for rock.

Features
1. Unique male teeth design and easy locking system.
2. Unique alloy, in which a composite insert is placed to reinforce the working tip of the tooth.
3. Self sharpening of the tooth, better ground penetration, increased production.
4. Increased lifetime, decreased frequency and duration of maintenance.
5. Products can be customized.

As with other wear parts, Dredge cutter teeth is the wear parts made in investment casting used for dredge head (refer to why casting for wear parts), which is the same as bucket teeth for excavator bucket. Below are the features of Dredge Cutter Teeth:

1. The unique male teeth design and easy locking system
2. The unique alloy, in which a composite insert is placed to reinforce the working tip of the tooth.
3. Self sharpening of the tooth, better ground penetration, increased production.
4. Increased lifetime, decreased frequency and duration of maintenance.
5. Advance investment casting technology for producing with low cost.

28DS Serial

No.P/No.Length(mm)Width(mm)Weight(kg)Remark128DS13AF2961147.2Flare type228DS13AC296395.2Chisel type328DS12AP27094.8Pick Point type

38DS Serial

No. P/No. Length(mm) Width(mm) Weight(kg) Remark
1 38DS14AF 319 108 10.0 Flare type
2 38DS14AC 319 44 8.5 Chisel type
3 38DS13AP 290 13 7.2 Pick type
4 8848-38DS / 320 24 Arm Adapter

48DS Serial

No. P/No. Length(mm) Width(mm) Weight(kg) Remark
1 48DS15AF 346 138 13.5 Flare type
2 48DS16AC 378 50 13.5 Chisel type
3 48DS14AP 300 13 10.5 Pick type

4G Serial

No. P/No. Length(mm) Width(mm) Weight(kg) Remark
1 4GAF2 399 132 15.2 Flare type
2 4GAC2 393 68 13.2 Chisel type
3 4GAP2 368 27 11.8 Pick type
4 8820-4G / 318 36 Arm Adapter
5 WN4G / 156 20.2 Ring Adapter

5G Serial

No. P/No. Length(mm) Width(mm) Weight(kg) Remark
1 5GAP2 401 32 18.5 Pick type
2 642D5G 422 163 36.9 Arm Adapter
3 WN5G 252 168 27.0 Ring Adapter

Wear is also an issue3. And as the teeth are in direct contact with the fresh material, the wear rates can be severe. The disadvantage of a teeth and adapter system is that that are quite big. So, less teeth fit on an arm, reducing production on average. As most of our CSD’s are working in more gentle sands we selected a cutter system, that provides more teeth to engage in the action, increasing production. As these teeth are fitted directly on the arms, there are no adapters that wear also. Consequently having no adapters, simpler arms and dirt cheap teeth result in a low investment low cutter system. Although you might have to check the state of your teeth more often, in the end you spend less money on a cubic meter produced.  T2.03 Dredge Pick Chisel Cutter Teeth