E262-3046T HYUNDAI Short Tiger Bucket Tooth, Sand Casting Hyundai HCE style R210 R290 RC250 Standard Long Bucket Rock Tooth, Forging & Casting digger dirt teeth Pick Point STD Side Pin Teeth Fits Wheel Crawler Excavator Loader Attachments, Digging Bucket Tips, Replacement Hyundai DRP TOOTH POINT System, China Factory GET Spare Parts Wear Parts Supplier
E262-3046T HYUNDAI Short Tiger Bucket Tooth, Replacement Aftermarket OEM Parts E262-3046T, E2623046T, 2713-9038T, 61N8-31310 Bucket Tooth Tip Point Suitable for Excavator, Loader, Backhoe, Dozer, Bulldozer. Buy Bucket Teeth & Adapters Hyundai genuine, new parts with delivery, aftermarket, replacement and not original Hyundai .
3 SERIES WHEEL EXCAVATOR R200W3
3-SERIES CRAWLER EXCAVATOR R210LC3 R210LC3H R250LC3 R290LC3 R290LC3H R320LC3
7 SERIES WHEEL EXCAVATOR R200W7
7-SERIES CRAWLER EXCAVATOR R210LC7 R210NLC7 R250LC7 R290LC7 R290LC7H R305LC7 R320LC7
FORESTRY MACHINE 42HDLL R290LC3LL
OLD CRAWLER EXCAVATOR R280LC R290LC R320LC
OLD WHEEL EXCAVATOR R200W2 Hyundai
High quality investment casting bucket teeth produced by clients’ drawings
We provide Bucket teeth and adapters, tips, tooth points, etc.
1. Material Available: Carbon steel, Alloy steel(high Manganese steel, high Chromium steel, etc)
2. Excavator Part Type: Caterpillar, Komatsu, Vo o,JCB, Hyundai, Daewoo, Hitachi,ect.
3. The bucket teeth are under Quenching and tempering treatment, the hardness are up to HRC47-52, with excellent elongation and tensile strength, so very suitable for many different hard working conditions.
1. Over 20 years experience in casting industry
2. High quality control, Competitive price, Fast delivery
3. Small quantity acceptable E161-3027TL Bucket Tiger Teeth For HYUNDAI R210 R215 Excavator
4. Sample available. Hyundai E262-3046, E2623046 Standard Teeth Points
5. OEM workable . HYUNDAI Pick Tooth Point E161-3027TL, E1613027TL
Bucket teeth for Hyundai excavators, including tooth point/tooth tip, adapters, locking pins and washers/retainers are available here.
|Family||Part #||Type||Pin||Retainer||Machine Model|
Small Excavator Bucket Tooth
(1) Steel plate should not be too wide, usually 50 mm.
(2) The steel plate must be welded at the front of the bucket teeth so that the undisturbed soil is not easily disturbed.
(3) The steel plate must be welded flat and not inclined.
(4) Excavator operators must be skilled. High Wear Resistent Material Excavators Bucket Teeth E262-3046RC for R290/320/235
2. Specific implementation methods
1. Construction Technology of Earthwork Excavation
(1) Technicians measure the wiring.
(2) Large excavators dig up the upper soil, and technicians measure the elevation to ensure that the 200-300 mm thick soil layer at the bottom of the pit does not move.
(3) The technicians put the side line of the foundation pit again, and at the same time, the welders began to refit the bucket teeth of the small excavator.
(4) Mini excavators dig, technicians measure elevation, 2 or 3 workers cooperate with digging.
(5) Inspection and acceptance.