J-BOLT Lip Centre Shroud LS3001600J Lip Thickness 3 Inch

J-BOLT Lip Centre Shroud LS3001600J Lip Thickness 3 Inch, CENTER SEGMENT, Bucket Guard, Wear Cap, Wing Shroud, KOMATSU PC1000 LOWER VERTICAL SHROUD, Replacement Komatsu Wear Protector System, Wrap around shroud, Bucket Armour, Loader Excavator Mining Tooth System and shovel lip shroud, Bucket Protection Part Systems, HENSLEY Shrouds Bucket Wear Attachments, Heavy GET Spare Parts China Supplier

J-BOLT Lip Centre Shroud LS3001600J Lip Thickness 3 Inch, Replacement Aftermarket OEM Parts      LS3001600J / LS300-1600J  / HLLS3001600J        Suitable for Dozers, Loaders, Excavators, Diggers, Buy Bucket adapters, guards & sidebars, Komatsu genuine, new parts with delivery, aftermarket, replacement and not original Komatsu HENSLEY.
All Brand GET Parts are produced to the highest industry standard to ensure our customers receive optimum life form our GET.

Hensley J-Bolt lip shrouds offer a quick and effective solution to add wear protection to large loader and hydraulic shovel lips. Some simple welding is required to initially attach the mounting base to the lip. The shrouds are mechanically attached to the base making installation, removal and replacement as easy as turning a socket. Mechanically attached shrouds are made from a hard alloy, achieving greater wear and abrasion resistance than weld-on shrouds.

Grind the top surface of the lip material that will be affected by weld. Insure all carbon slag or other impurites from the removal of the old base are ground out. The use of non-destructive testing at this point will help determine if there are any cracks present in the base material. Repair base material as needed. (Now proceed as with new installation.)
Position the shroud on the lip making sure that the blunt throat surface of the shroud “X” contacts the blunt front surface of the lip “Y”. There should be no contact between the bevel of the lip and area “Z” of the shroud.
NOTE: This contact must be maintained throughout the assembly process to insure the proper location of the weld base.

Dimensions – Inches (mm.) Weight Lip Center Deg. Lbs./ Weld
Thickness Shroud A B C D E F G H I Kgs. Base J-Bolt
2″ LS200-1350J 13-1/2 5 2-1/8 1-3/8 8-1/4 3-1/2 13-5/8 3/4 30O 64.0/ LSWB3 SFA34J4
(343) (127) (54) (35) (210) (89) (346) (19) 29.0  LS2501500J J-BOLT EDGE PROTECTION CENTER
2-1/2″ LS250-1500J 15 5 2-5/8 1-5/8 9-3/4 4-1/2 15 1-1/16 30O 82.0/ LSWB3 SFA34J4
(381) (127) (67) (41) (248) (114) (381) (27) 37.2
2-3/4″ LS275-1675J 16-3/4 6-1/2 2-7/8 1-7/8 11 6-3/8 18-3/4 1-5/8 35O 160.0/ LSWB8 SFA1J4
(425) (165) (73) (48) (279) (162) (476) (41) 72.6 J-BOLT Lip Centre Shroud
3″ LS300-1000J 10 6-1/2 3-3/16 2 11-3/16 7-13/16 17-11/16 3-3/16 Blunt 125.0/ LSWB8 SFA1J4
(254) (165) (81) (51) (284) (198) (449) (81) 56.7
3-1/2″ LS350-1250J 12-1/2 6-1/2 3-11/16 2-3/4 18-1/2 6-3/8 20-11/16 1 30O 180.0/ LSWB8 SFA1J4
(317) (165) (91) (70) (470) (162) (525) (25) 81.7 Excavator Intertooth Protection LS2501500J2L
4″ LS400-1175J 11-3/4 6-1/2 4-1/16 1-5/16 10-11/16 4-13/16 20-7/16 1-1/4 30O 110.0/ LSWB1
(298) (165) (103) (33) (271) (122) (519) (32) 50.0 HENSLEY J-BOLT SHROUD
LS400-1600J 16 6-1/2 4-3/16 2-3/4 12-5/8 6-3/8 21-3/4 1 30O 194.0/ LSWB8 SFA1J4
(406) (165) (106) (70) (321) (162) (552) (25) 88.0
LS400-1750J 17-1/2 6-1/2 4-3/16 3-1/4 12-1/4 7-1/2 21-11/16 1-1/2 30O 290.0/ LSWB8 SFA1J4
(445) (165) (106) (83) (311) (191) (551) (38) 131.6
4-3/4″ LS475-1400J 14 8-3/8 4-15/16 2-1/4 14-5/8 7-3/8 26-7/8 1-3/4 30O 262.0/ LSWB6 SFA125J4
(356) (213) (125) (57) (372) (187) (683) (44) 118.9
LS475-1700J 17 8-3/8 4-14/16 2-1/4 14-5/8 7-3/8 26-7/8 1-3/4 30O 354.0/ LSW B6 SFA125J4
(432) (213) (125) (57) (372) (187) (683) (44) 160.7  Komatsu Excavator Center J-Bolt Shroud LS2751675J
5-1/2″ LS550-1750J 17-1/2 8-3/8 5-11/16 2-1/4 15-3/4 7-3/8 27-3/4 2 30O 396.0/ LSWB6 SFA125J4
(444) (213) (144) (57) (400) (187) (705) (510) 179.8
5-1/2″ LS550-2200J 22 8-3/8 5-11/16 2-1/4 15-3/4 7-3/8 27-3/4 2 30O 388.0/ LSWB6 SFA125J4
(559) (213) (144) (57) (400) (187) (705) (51) 176.0
6-1/4″ LS625-1400J 14 8-3/8 6-1/2 2-1/4 17-3/4 8 29-13/16 2 30O 330.0/ LSWB6 SFA125J4
(356) (213) (165) (57) (451) (203) (757) (51) 30O 149.8
Replaces LS130-1700J 17 10-1/2 9-1/4 4-1/2 24 11 30-5/8 3-9/16 30O 840.0/ LSWB9 SFA150J4
ESCO part# (432) (267) (235) (114) (610) (279) (778) (90) 381.4 HENSLEY J-BOLT SHROUD
TCCF130-21A on Hitachi
EX5500 (not a directreplacement) J-BOLT Lip Centre Shroud LS3001600J Lip Thickness 3 Inch
Replaces LS130-15001J 15 8-3/8 10-5/8 4 16-1/4 10-1/4 37-3/4 2-9/16 30O 640.0/ LSWB6 SFA125J4
ESCO part# (381) (213) (270) (102) (413) (260) (959) (65) 290.3 TCCF130-3B
on Liebherr 996(not a direct replacement) J-BOLT Lip Centre Shroud

Angle Shroud Weight Lip [RH Shown, Lbs./ Weld Thickness LH Opposite] A B C D E F G H I Kgs. Base J-Bolt
2″ LS200-1350JR 13-1/2 5 2-1/8 1-3/8 13-5/8 3/4 8-1/4 30O 10O 59.0/ LSWB3 SFA34J4
LS200-1350JL (343) (127) (54) (35) (346) (19) (210) 26.8
2-1/2″ LS250-1500JR 15 5 2-5/8 1-5/8 15 1-1/16 9-3/4 30O 15O 82.0/ LSWB3 SFA34J4
LS250-1500JL (381) (127) (67) (41) (381) (27) (248) 37.2
2-3/4″ LS275-1675JR 16-3/4 6-1/2 2-7/8 1-7/8 18-3/4 1-5/8 11 35O 15O 160.0/ LSWB8 SFA1J4
LS275-1675JL (425) (165) (73) (48) (476) (41) (279) 72.6
3″ LS300-1000JR 10 6-1/2 3-3/16 2 17-13/16 3-3/16 11-3/16 Blunt 15O 127.0/ LSWB8 SFA1J4
LS300-1000JL (254) (165) (81) (51) (452) (81) (284) 57.6
3-1/2″ LS350-1250JR 12-1/2 6-1/2 3-11/16 2-3/4 22-1/8 1 14-15/16 30O 15O 180.0/ LSWB8 SFA1J4
LS350-1250JR (317) (165) (91) (70) (562) (25) (379) 81.7
4″ LS400-1600JR 16 6-1/2 4-3/16 2-3/4 21-3/4 1 12-5/8 30O 15O 207.0/ LSWB8 SFA1J4
LS400-1600JL (406) (165) (106) (70) (552) (25) (321) 93.9
LS400-1750JR 17-1/2 6-1/2 4-3/16 3-1/4 21-11/16 1-1/2 12-1/4 30O 14O 300.0/ LSWB8 SFA1J4
LS400-1750JL (445) (165) (106) (83) (551) (38) (311) 136.1
4-3/4″ LS475-1700JR 17 8-3/8 4-15/16 2-1/4 27-1/2 1-3/4 14-3/4 30O 14O 305.0/ LSWB6 SF125J4
LS475-1700JL (432) (213) (125) (57) (699) (44) (375) 138.3
LS475-1950JR 19-1/2 8-3/8 4-15/16 2-1/4 27-1/2 1-3/4 14-3/4 30O 14O 400.0/ LSWB6 SFA125J4
LS475-1950JL (432) (213) (125) (57) (699) (44) (375) 182.0
5-1/2″ LS550-1750JR 17-1/2 8-3/8 5-11/16 2-1/4 28-1/32 2 15-3/4 30O 14O 400.0/ LSWB6 SFA125J4
LS550-1750JL (445) (213) (144) (57) (712) (51) (400) 181.6
5-1/2″ LS550-2200JR 22 8-3/8 5-11/16 2-1/4 28-5/8 2 13-7/8 30O 14O 405.0/ LSWB6 SFA125J4
LS550-2200JL (559) (213) (144) (57) (727) (51) (352) 183.7
6-1/4″ LS625-2000JR 20 8-3/8 6-1/2 2-1/4 30-3/16 2 17-3/4 30O 14O 420.0/ LSWB6 SFA125J4
LS625-2000JL (508) (213) (165) (57) (767) (51) (451) 190.5
LS625-2200JR 22-1/4 8-3/8 6-7/16 2-11/16 31-11/16 2-11/16 20-9/16 30O 14O 635.0/ LSWB6 SFA125J4
LS625-2200JL (565) (213) (164) (68) (804) (67) (523) 288.3
Replaces LS130-15001JR 15 8-3/8 10-5/8 4-1/4 38-5/8 2-9/16 16-1/4 30O 15O 650.0/ LSWB6 SFA125J4
ESCO part# LS130-15001JL (381) (213) (270) (108) (981) (65) (413) 294.8
TCCF130-4RC TCCF130-4LC on Liebherr 966 (not a direct replacement)