LS4751950JR J Bolt Lip Shroud System Right Hand

LS4751950JR J Bolt Lip Shroud System Right Hand, WA600 WA700 Bucket Guard Segment, Wear Cap, Wing Shroud, KOMATSU PC1000 LOWER VERTICAL SHROUD, Replacement Komatsu Wear Protector System, Wrap around shroud, Bucket Armour, Loader Excavator Mining Tooth System and shovel lip shroud, Bucket Protection Part Systems, HENSLEY Bucket Wear Attachments, Heavy GET Spare Parts China Supplier

LS4751950JR J Bolt Lip Shroud System Right Hand ,  Replacement Aftermarket OEM Parts      LS4751950JR  /  LS475-1950JR       Suitable for Dozers, Loaders, Excavators, Diggers, Buy Bucket adapters, guards & sidebars, Komatsu genuine, new parts with delivery, aftermarket, replacement and not original Komatsu HENSLEY.
All Brand GET Parts are produced to the highest industry standard to ensure our customers receive optimum life form our GET.

Hensley J-Bolt lip shrouds offer a quick and effective solution to add wear protection to large loader and hydraulic shovel lips. Some simple welding is required to initially attach the mounting base to the lip. The shrouds are mechanically attached to the base making installation, removal and replacement as easy as turning a socket. Mechanically attached shrouds are made from a hard alloy, achieving greater wear and abrasion resistance than weld-on shrouds.

Position the weld base according to the chart below (a deviation of ±3/32″ (2.5 mm) is allowable). After placement has been confirmed, preheat the base material to 300OF/147OC and tack weld the base at the rear along weld prep surface “A”.
LSWB1 2-1/4″ (57)
LSWB3 2-1/4″ (57)
LSWB6 3-1/2″ (89)
LSWB7 2-1/4″ (57)
LSWB8 2-1/4″ (57)

J-BOLT BASES WELD BASECAB
LSWB1 8.5 3.9 5-1/8″ (130) 6″ (152) 2-1/8″ (54)
LSWB3 3.2 1.5 3-7/8″ (98) 4-1/2″ (114) 1-7/16″ (36)
LSWB6 13.5 6.1 6-5/8″ (168) 6-3/4″ (171) 2-3/4″ (70)
LSWB7 5.0 2.3 4-3/8″ (111) 4-1/2″ (114) 1-7/8″ (48)
LSWB8 6.5 2.9 5-1/8″ (130) 5-1/4″ (133) 1-7/8″ (48)
LSWB9 27.5 12.5 8-1/2″ (216) 9″ (229) 3″ (76)

Position the shroud on the lip making sure that the blunt throat surface of the shroud “X” contacts the blunt front surface of the lip “Y”. There should be no contact between the bevel of the lip and area “Z” of the shroud.
NOTE: This contact must be maintained throughout the assembly process to insure the proper location of the weld base.

Grind the top surface of the lip material that will be affected by weld. Insure all carbon slag or other impurites from the removal of the old base are ground out. The use of non-destructive testing at this point will help determine if there are any crackspresent in the base material. Repair base material as needed. (Now proceed as with new installation.)
Position the shroud on the lip making sure that the blunt throat surface of the shroud “X” contacts the blunt front surface of the lip “Y”. There should be no contact between the bevel of the lip and area “Z” of the shroud.
NOTE: This contact must be maintained throughout the assembly process to insure the proper location of the weld base.

WA100 WA320-7 LS2001350J
WA100-1 WA320-8 LS2501500J
WA100-3 WA350-1 LS2501500J2L LS4751700JR
WA100-5 M WA380 LS2751675J
WA1200 WA380-1 LS3001000J
WA1200-3 WA380-3 LS3001000J2B
WA1200-3 HL WA380-3 MC LS3001600J
WA1200-6 WA380-5 LS300M256J  LS4751700JL
WA120-1 WA380-6 LS3501250J
WA120-3 WA380-7 LS3501750J
WA120-3 L WA380-8 LS350M275J  LS4001600JR Komatsu WA180-3 WA420-1 Wheel Loader Lip Shroud
WA150-1 WA390-1 LS400900J
WA150-5 WA400-1 LS4001175J
WA180-1 WA400-5 LS4001200J
WA180-3 WA420-1 LS4001600J
WA180-3 PT WA420-3 LS4001600JCS LS4751700JR
WA20-1 WA420-3 MC LS4001750J
WA200-1 WA430-6 LS4002450J
WA200-3 WA450-1 LS4251475J
WA200-5 WA450-2 LS2001350JR
WA200-5 PT WA450-3 LS2001350JL
WA200-6 WA450-3 MH LS2501500JR
WA200-7 WA450-5 LS2501500JL  LS4751700JL
WA200-8 WA450-6 LS2501500JR2L
WA200-6 PZ WA470-1 LS2501500JL2L  LS4001600JL Komatsu Construction and Mining Lip Shroud For WA180 WA420
WA250-1 WA470-3 LS2751675JR
WA250-3 WA470-3H LS2751675JL
WA250-3 PT WA470-3 MAG LS300M257JR
WA250-5 WA470-5 LS300M257JL
WA250-5 PT WA470-7 LS3001000JR
WA250-6 WA470-8 LS3001000JL
WA250-6 PZ WA480-5 LS3001000JR2B
WA270-3 WA480-6 3000901HX
WA270-7 WA480-8 3000902HX (RH)
WA270-8 WA500 3000903HX (LH)
WA300-1 WA500-1 3000904HX
WA300-3 WA500-3 3000905HX LS4751700JR
WA320-1 WA500-6 3000906HX
WA320-3 WA500-7 WS100L
WA320-3 MC WA500-7 STEEL MILL WS100R
WA320-5 WA500-8 WS140  Komatsu Heavy Duty Wheel Loader Lip Shroud LS4001600JRS
WA320-6 WA600-1 WS90 LS4751700JL
WA600-3 LS1301700J LS4001750JR
WA600-6 LS1301700JSTD LS4001750JL
WA600-6 STEEL MILL LS1302350J LS4751300J
WA600-8 LS1302350JHD LS4751400J
WA700-1 LS6401950J LS4751700J
WA700-3 LS8002200J LS4751950J
WA800-1 LS400900JL LS5501750J
WA800-2 LS4001200JL LS5502200J
WA800-3 LS4001200JR LS6251400J
WA899-3 LS4001600JR LS6251800J
WA900 LS4001600JL LS6252000J
WA900-1 LS4001600JRS LS4751300JR
WA900-3 LS4001600JLS LS4751300JL  WA180-3 PT WA420-3 Komatsu Loader Lip Shroud LS4001600JLS
LS4751400JR LS6252000JR LS350M259JR
LS4751400JL LS6252000JL LS350M259JL
LS4751700JR LS6252200JR LS400900JR
LS4751700JL LS6252200JL 10WSHX
LS4751950JR LS6252400JR 13WSHX
LS4751950JL LS6252400JL 14WS2HX
LS5501750JR LS3001000JL2B CD9100BHX
LS5501750JL LS3001700JR WS25
LS5502200JR LS3001700JL 14WS3230HX
LS5502200JL LS350925JR 14WS32HX
LS6251800JR LS350925JL 14WSHX
LS6251800JL LS3501250JR WS45
LS3501750JR LS3501250JL WS60  HENSLEY LS4001750JR WA200-1 WA420-3 MC Loader Lip Shroud

LS6251800JR BUCKET PROTECTION RIGHT
KOMATSU

LS6251800J BUCKET PROTECTION CENTRAL
KOMATSU Left Hand HENSLEY Shovel Lip Shroud LS4751300JL

LS5502200JR BUCKET PROTECTION RIGHT
KOMATSU

LS5502200JL BUCKET PROTECTION LEFT
KOMATSU

LS5502200J BUCKET PROTECTION CENTRAL
KOMATSU

LS4751700JR BUCKET PROTECTION RIGHT
KOMATSU

21K-03-72590
KOMATSU PROTECTION

LS6252400JL BUCKET PROTECTION LEFT
KOMATSU

LS6251800JL BUCKET PROTECTION LEFT
KOMATSU

LS4751950JR BUCKET PROTECTION RIGHT
KOMATSU

LS4751950JL BUCKET PROTECTION LEFT
KOMATSU

LS4751700JL BUCKET PROTECTION LEFT
KOMATSU