LS6251600JR LS6251600JL KOMATSU STYLE LIP SHROUDS

LS6251600JR LS6251600JL KOMATSU STYLE LIP SHROUDS, WA600 WA700 Bucket Guard Segment, Wear Cap, Wing Shroud, KOMATSU PC3000 LOWER VERTICAL SHROUD, Replacement Komatsu Wear Protector System, Wrap around shroud, Bucket Armour, Loader Excavator Mining Tooth System and shovel lip shroud, Bucket Protection Part Systems, HENSLEY Bucket Wear Attachments, Heavy GET Spare Parts China Supplier

LS6251600JR LS6251600JL KOMATSU STYLE LIP SHROUDS ,  Replacement Aftermarket OEM Parts        LS6251600JR LS6251600JL /  LS625-1600JR LS625-1600JL         Suitable for Dozers, Loaders, Excavators, Diggers, Buy Bucket adapters, guards & sidebars, Komatsu genuine, new parts with delivery, aftermarket, replacement and not original Komatsu HENSLEY.
All Brand GET Parts are produced to the highest industry standard to ensure our customers receive optimum life form our GET.

Hensley J-Bolt lip shrouds offer a quick and effective solution to add wear protection to large loader and hydraulic shovel lips. Some simple welding is required to initially attach the mounting base to the lip. The shrouds are mechanically attached to the base making installation, removal and replacement as easy as turning a socket. Mechanically attached shrouds are made from a hard alloy, achieving greater wear and abrasion resistance than weld-on shrouds.

Position the weld base according to the chart below (a deviation of ±3/32″ (2.5 mm) is allowable). After placement has been confirmed, preheat the base material to 300OF/147OC and tack weld the base at the rear along weld prep surface “A”.
LSWB1 2-1/4″ (57)
LSWB3 2-1/4″ (57)
LSWB6 3-1/2″ (89)
LSWB7 2-1/4″ (57)
LSWB8 2-1/4″ (57)

J-BOLT BASES WELD BASECAB
LSWB1 8.5 3.9 5-1/8″ (130) 6″ (152) 2-1/8″ (54)
LSWB3 3.2 1.5 3-7/8″ (98) 4-1/2″ (114) 1-7/16″ (36)
LSWB6 13.5 6.1 6-5/8″ (168) 6-3/4″ (171) 2-3/4″ (70)
LSWB7 5.0 2.3 4-3/8″ (111) 4-1/2″ (114) 1-7/8″ (48)
LSWB8 6.5 2.9 5-1/8″ (130) 5-1/4″ (133) 1-7/8″ (48)
LSWB9 27.5 12.5 8-1/2″ (216) 9″ (229) 3″ (76)

Position the shroud on the lip making sure that the blunt throat surface of the shroud “X” contacts the blunt front surface of the lip “Y”. There should be no contact between the bevel of the lip and area “Z” of the shroud.
NOTE: This contact must be maintained throughout the assembly process to insure the proper location of the weld base.

Grind the top surface of the lip material that will be affected by weld. Insure all carbon slag or other impurites from the removal of the old base are ground out. The use of non-destructive testing at this point will help determine if there are any crackspresent in the base material. Repair base material as needed. (Now proceed as with new installation.)
Position the shroud on the lip making sure that the blunt throat surface of the shroud “X” contacts the blunt front surface of the lip “Y”. There should be no contact between the bevel of the lip and area “Z” of the shroud.
NOTE: This contact must be maintained throughout the assembly process to insure the proper location of the weld base.

ASTAC50X345-1B
ASTAC50X345-1C
ASTAC50X345-2LB
ASTAC50X345-2LC
ASTAC50X345-2RB
ASTAC50X345-2RC LS4751950JR J Bolt Lip Shroud System Right Hand
ASTAC50X470-1A
ASTAC60X350-1
ASTAC60X350-2L
ASTAC60X350-2R
ASTAC65X330-1LB
ASTAC65X330-1RB
ASTAC65X350-1A
ASTAC65X380-1A
ASTAC65X380-2LA
ASTAC65X380-2RA
ASTAC65X385-1A
ASTAC65X385-2LA
ASTAC65X385-2RA
ASTAC65X405-1B
ASTAC70X240-1B
ASTAC70X240-2L
ASTAC70X240-2R
ASTAC70X320-1B  LS4751950JL J-Bolt Komatsu Lip Guard Shroud LH
ASTAC70X400-1B
ASTAC80X305-3
ASTAC80X305-4L
ASTAC80X305-4R
ASTAC80X350-1
ASTAC90X225-1
ASTAC90X225-2L
ASTAC90X225-2R
ASTAC90X245-1A
ASTAC90X245-2LA
ASTAC90X245-2RA
ASTAC90X270-6L
ASTAC90X270-6R
ASTAC90X320-2
ASTAC90X320-5
ASTAC90X320-6L
ASTAC90X320-6R
ASTAC90X360-1  Komatsu J-Bolt Shrouds LS5501600JR LS5501600JL
ASTAC90X360-2L
ASTAC90X360-2R
ASTAC90X390-1L
ASTAC90X390-1R
ASTAC90X430-1L
ASTAC90X430-1R
ASTAP
ASTBB
ASTBC100X290-3
ASTBC100X290-4L
ASTBC100X290-4R
ASTBC100X375-1L
ASTBC100X375-1R
ASTBC100X375-2
ASTBC100X390-1A
ASTBC100X410-1B
ASTBC100X410-2LB
ASTBC100X410-2RB
ASTBC100X425-2L
ASTBC100X425-2R
ASTBC100X430-1
ASTBC100X430-2L
ASTBC100X430-2R
ASTBC100X445-3
ASTBC100X445-4L
ASTBC100X445-4R
ASTBC100X555-1
ASTBC120X330-1A
ASTBC120X330-2LA
ASTBC120X330-2RA
ASTBC120X395-1
ASTBC120X395-2L
ASTBC120X395-2R
ASTBC120X410-1
ASTBC120X410-2L
ASTBC120X410-2R
ASTBC120X410-3L
ASTBC120X410-3R
ASTBC120X420-1
ASTBC120X420-2L
ASTBC120X420-2R
ASTBC120X420-3
ASTBC120X420-4L
ASTBC120X420-4R
ASTBC120X440-1B
ASTBC120X440-2LB
ASTBC120X440-2RB
ASTBC120X470-1A
ASTBC120X535-3
ASTBC120X535-4L
ASTBC120X535-4R
ASTBC140X420-1A
ASTBC140X420-2LA
ASTBC140X420-2RA
ASTBC140X490-1B
ASTBC140X575-1LA
ASTBC140X575-1RA
ASTBC150X445-1
ASTBC150X445-2L
ASTBC150X445-2R
ASTBC160X430-1
ASTBC160X450-1
ASTBC160X450-2L
ASTBC160X450-2R
ASTBC160X450-3
ASTBC160X450-4L
ASTBC160X450-4R
ASTBC160X465-1
ASTBC160X465-2L
ASTBC160X465-2R
ASTBC160X570-1L
ASTBC160X570-1R
ASTBC90X390-1A
ASTBP