T270SP John Deere 27 Series Bucket Tooth Teeth

Specification:
Part No.    T270SP
Weight:       8.84 lbs
Brand Name Custom Logo
Replacement Brand    John Deere / JD / H&L
Processing: Precision Casting / Forged Forging
Material: Wear Alloy Steel
Advantages: Perfect Fitting, Excellent Wear Life
Color: Yellow / Grey/ Black/ Red etc.
Trade Mark: As Customer’s Request

 

SUBMIT A REQUEST PARTS QUOTE

T270SP John Deere 27 Series Bucket Tooth Teeth, Bucket Fabricated Dirt Tooth, H&L 26 Series Standard Teeth Ripping Bucket Tooth Tip Point, Excavator Motor Grader Dozer Wheel Loader John Deere Fanggs Dipper Loading Digging Teeth, JD Casting Forged bucket tooth, Replacement H&L Spare Parts G.E.T wear part China supplier

 

T270SP John Deere 27 Series Bucket Tooth Teeth ,   Replacement Aftermarket OEM Parts    T270SP Tooth Suitable for Bulldozers, Loaders, Graders, Excavators Diggers, Backhoe, Buy Bucket tips & adaptors, teeth points  John Deere Hensley genuine, new parts with delivery, aftermarket, replacement and not original Fanggs John Deere H&L.

Weight
8.841 lb
Width
3.681 in
Length
7.362 in

24 Series Forged Tooth. 7.5 x 2.25 inches. New Holland #87411607, GETT #P240S, Hensley #24SPHX, H&L #240SP, John Deere #T240.

Fabricated 8823 HD Bucket Tooth. New Holland #293008, Fabco #8823, Tisco #Y8823, Hensley #23-HXL, Case #D44193, John Deere #T23R/U42751.

23 Series Cast Penetrator Bucket Tooth. 6.25 x 2 inches. New Holland #B96108 & 251474, Hensley #T-23, GETT #SP2166S, Fabco #8623-1, H&L #230T, Deere #T230ST, Case #D80119, Pengo #2300C, Paladin #250142.

Design
The parabolic (dished-out) design creates a wedging and self-tightening fit. A recessed channel on the inside sidewall of the tooth matches a tapered extension on the adapter nosepiece, forming a locking fit.
The design absorbs impact loads.
Retention
A roll pin is used on the 156, 160, 220, and 310 Series. Smaller series teeth are retained with a vertical roll pin, allowing easy removal and installation.
The 350, 400, and 475 Series use a vertical flex pin made of two hardened steel forgings with vulcanized neoprene between. The flex pin provides a four way locking support. A steel key retains the 290, 330, 370, 410, 500, and 550 Series. This key provides outstanding retention in all types of applications.
It is not reusable.

FOUR-WHEEL-DRIVE LOADERS 204L / 204K
Bucket, 0.8 m3 (1.05 cu. yd.) John Deere T260 Motor Grader Ripper Tooth
Part No. Part Name Qty. Remarks 324H / 344H
Weld-On Cutting Edge for 1.5-m3 (2.0 cu. yd.) x 2400-mm (94.5 in.)- Wide Bucket 444K
Auxiliary Cut Part No.
ting Edge, 2550 mm (100 in.)
Part Name Qty. Remarks 544J
Auxiliary Cutting Edge, 2550 mm (100 in.), for 2.3-m3 (3.0 cu. yd.) Bucket
AT314218 Cutting Edge 1 Weld-On Part No. Part Name Qty. Remarks T157311 Cutting Edge 2 Center (Auxiliary) Part No. Part Name Qty. Remarks
AT314213 Cutting Edge 2 Inner AT219301 Dura-Max 1 T146672 Cutting Edge 2 End (Auxiliary) T157311 Cutting Edge 2 Center (Auxiliary)
AT314212 Cutting Edge 2 Outer Cutting Edge T146672 Cutting Edge 2 End (Auxiliary)
Bucket Teeth, 2550-mm (100 in.) Cutting Edge
Bucket, 1.1 m3 (1.44 cu. yd.) Side Cutter Part No. Part Name Qty. Remarks
Part No. Part Name Qty. Remarks Part No. Part Name Qty. Remarks T157306 Cutting Edge 7
AT314223 Cutting Edge 1 Weld-On AT219348 Cutting Edge 1

AT314220 Cutting Edge 2 Inner

AT219349 Cutting Edge 1

Weld-On, Bucket Length Cutting Edge, 2550 mm (100 in.) Part No. Part Name Qty. Remarks

Bucket, Bolt-On Cutting Edge, 0.8 m3 (1.0 cu. yd.)/1.1 m3 (1.4 cu. yd.)

Part No. Part Name Qty. Remarks
AT250429 Cutting Edge 2

Part No. Part Name Qty. Remarks

T157493 Cutting Edge 7 2690 mm (106 in.) with Teeth

Part No. Part Name Qty. Remarks

AT314212 Cutting Edge 2 Outer

Bolt-On Cutting Edge for 1.3-m3 (1.75 cu. yd.) x 2400-mm (94.5 in.)- Wide Bucket
Part No. Part Name Qty. Remarks
AT250430 Cutting Edge 1
AT250429 Cutting Edge 2

Part No. Part Name Qty. Remarks

T146672 Dura-Max Cutting Edge

T353805 Dura-Max Cutting Edge

2 Outer (Auxiliary)

1 Bucket Length

Part No. Part Name Qty. Remarks

T825115C Cutting Edge 1 2550-mm (100 in.) RH T825100C Cutting Edge 15 2690-mm (106 in.) Center T825106C Cutting Edge 1 2690-mm (106 in.) LH

Auxiliary Cutting Edge, 2550 mm (100 in.) Part No. Part Name Qty. Remarks

Auxiliary Cutting Edge Kit for Light-Material Bucket, 3048 mm (120 in.)

Part No. Part Name Qty. Remarks
AT261184 Cutting Edge 1 27 Series Bucket Tooth
AT261184 Cutting Edge 2
Bolt-On Cutting Edge for 1.3-m3 (1.75 cu. yd.) x 2400-mm (94.5 in.)- Wide Bucket
Part No. Part Name Qty. Remarks
AT250430 Cutting Edge 1
AT250429 Cutting Edge 2

Bucket, Bolt-On Cutting Edge, 1.5 m3 (2.0 cu. yd.)/1.3 m3 (1.75 cu. yd.)
Part No. Part Name Qty. Remarks AT250430 Cutting Edge 1 Inner AT250429 Cutting Edge 2 Outer

Bucket, 1.5 m3 (2.0 cu. yd.)/Light-Material, 2.0 m3 (2.6 cu. yd.)

Part No. Part Name Qty. Remarks

T146672 Cutting Edge 2 Outer

Part No. Part Name Qty. Remarks

Part No. Part Name Qty. Remarks

Bucket, Loader/Hi-Vis Coupler, 1.9 m3 (2.5 cu. yd.)

Part No. Part Name Qty. Remarks

T157492 Dura-Max Cutting Edge

2 Center (Auxiliary) 27 Series Bucket Tooth

Part No. Part Name Qty. Remarks

T157493 Dura-Max Cutting Edge

7 2690-mm (106 in.) Edge

Auxiliary Cutting Edge Kit for Light-Material Bucket, 2896 mm (114 in.)
Part No. Part Name Qty. Remarks
T354507 Dura-Max Cutting Edge 2 Inner
T146672 Cutting Edge 4 Outer/Side Cutter
T353805 Dura-Max Cutting Edge 1 Weld-On, Bucket Length

Bucket Teeth for 2.3-m3 (3.0 cu. yd.)/2.7-m3 (3.5 cu. yd.) Bucket
Part No. Part Name Qty. Remarks
T157493 Cutting Edge 7

JAGZ
Part No. Part Name Qty. Remarks
T825100C Cutting Edge 15 Center
T825105C Cutting Edge 1 RH
T825106C Cutting Edge 1 LH

error: Our Bucket Teeth & Adapters Content is protected !