V19SYL V19 Points Standard Blade Tooth, Super V Tooth System, Digging Dirt Bucket Tooth, Esco Conical Top Pinned Tooth System, Super V Tooth Point, Trencher Bucket Ultralok Chisel Tooth, Blade bucket teeth for excavator loader, Wear Parts, GET Spare Parts China Supplier
V19SYL V19 Points Standard Blade Tooth – V19SYL 19SYL esco style super v dirt bucket teeth & V23PN pin. Standard TOOTH fits Case New Holland.
MACHINE SIZE:7-10 TON
SUPER-V PINS:
V23PN Esco 23 Series Super-V Pin
SUPER-V ADAPTERS:
5854-V19 1-1/2 Bottom Leg
WN-V19 Super-V 19 Series Weld On Adapter Nose
Recommended for Excavators
SYL – Standard, general purpose shape for excavator applications. Wears sharp for excellent penetration during entire point life. Center rib adds strength and extra wear metal for longer life.
RYL – Standard rock tooth for optimum system strength in tough applications. Excellent heavy duty alternative to the popular SYL design.
SDX – Heavy duty chisel shape for moderate penetration and wear metal, as well as excellent strength. Ideal for tough applications that need both wear metal and penetration.
SHV – Extra heavy duty shape for extreme applications requiring optimum strength and wear metal. Unique blade shape puts wear metal to the outside of the point to cut clearance for the side of the bucket and maintain an excellent wear profile for the life of the point.
VY/TVY – Pick style shapes for excellent penetration. Ideal for frost, shale, slate and other hard to penetrate materials. The VY is for the center positions and the TVY is for the corners to cut clearance for the side of the bucket. In penetration applications where additional strength is of primary concern or full machine power is used, pick style shapes are also offered in heavy-duty versions sizes V29-V59.
FLARE – Sharp flared bit for general purpose clean up. Excellent for trench bottoms and foundation excavations.
TYLCE – Special non-twist point for use in continuous edge applications. When a blade is welded to these points, removal of the blade assembly is possible without twisting the points off. Can also be used on front end loaders.
Komatsu Kmax system
K15RC,K20T,K20RC,K20SYL,K25T,K25RC,K25SYL,K30T, K30RC,K30SYL,K40RC,K40SYL,K50RC,K70RC,K70SYL, K85RC,XS40TV,XS50TV,XS115T,XS115RC,XS145SYL, V17TYL Standard Chisel Tip Point for Wheel Loader
ESCO Super-V Series
V17TYL,V19TYL,V23SYL,V29VY,V29SYL,V29SHV,V33VY, V33TYL,V33SHV,V39VY,V39SYL,V39SHV,V39A,V43VX, V43RYL,V43SHV,V43VX,V43A,V51VY,V51RYL,V51SDX, V51SHV,V61VX,V61RYL,V61SD,V61SHV,V69VX,V69RYL, V69SD,V71RY,V81VX,V81SYL,V81SD,
Exco BUCKET TEETH & ADAPTERS
18S | 18 | Tip-Standard |
833-18 | 18 | Two Strap Adapter |
25S | 25 | Tip-Standard |
3806-25 | 25 | Two Strap Adapter |
30S | 30 | Tip-Standard |
3807-30 | 30 | Two Strap Adapter |
35S | 35 | Tip-Standard |
3808-35 | 35 | Two Strap Adapter |
40S | 40 | Tip-Standard |
3809-40 | 40 | Two Strap Adapter |
45S | 45 | Tip-Standard |
3810-45 | 45 | Two Strap Adapter |
50S | 50 | Tip-Standard |
3811-50 | 50 | Two Strap Adapter |
55S | 55 | Tip-Standard |
3832-55 | 55 | Two Strap Adapter |
22RC10 | 22 | Tip-Ripper |
25RC12 | 25 | Tip-Ripper |
35RC14 | 35 | Tip-Ripper |
PARTS NUMBER | BRAND | WEIGHT | MACHINE MODELS |
V13SYL | 0.8 | TOOTH | |
V13VY | 0.7 | TOOTH | |
V17SYL | 1.2 | TOOTH | |
V17TYL | 1.3 | TOOTH | |
V19SYL | 2.4 | TOOTH | |
V19TY | 2.1 | TOOTH | |
V19TL | 2.3 | TOOTH | |
V19SYL-WP | 2.1 | TOOTH | |
V21SYL | 3 | TOOTH | |
V23SYL | 3 | TOOTH | |
V23AD | 4.6 | TOOTH | |
V27SYL | 4.7 | TOOTH | |
V29SYL | 4.7 | TOOTH | |
V29S6F | 6.2 | TOOTH | |
V33SYL | 6.9 | TOOTH | |
V33RYL | 7.5 | TOOTH | |
V33SHV | 8 | TOOTH | |
V33RC | 7.3 | TOOTH | |
V37SYL | 7.2 | TOOTH | |
V33AR | 10.9 | TOOTH | |
V39SYL | 10 | TOOTH | |
V39RC | 14.2 | TOOTH | |
V39RC-F1 | 8.5 | TOOTH | |
V39RC-F2 | 11.6 | TOOTH |