Volvo Tooth System for Excavators VO460RC, V460RC, EC460RC,14536800RC, Excavator Digging Rock Chisel Bucket Teeth Fits Volvo, Bolt-on Side Pin Tooth Point, Replacement Volvo Loader Excavator Backhoe Digger VTS VOE Bucket Blade Teeth System, Precision Drop Forging Casting GET Spare Parts China Supplier
Volvo Tooth System for Excavators VO460RC, V460RC, EC460RC,14536800RC with Volvo Tooth Pins and Retainer 5-8GPE/15GPE/20GPE/30GPE/40GPE/55GPE/65GPE/80GPE/125GPE. Quality aftermarket G.E.T. (bucket teeth) for Caterpillar (CAT), JCB, Bobcat, Takeuchi, John Deere, Case, Komatsu, Kubota and many others including manufacturers such as Esko, Hensley, H&L for all your backhoe, loader, skid steer, grader, scraper and excavator bucket tooth (teeth) needs. Factory Direct We focus both on inner quality and also on surface finish. Due to our rich casting experience, we continuously improve our investment casting in every process, so that we can get very good surface quality.
Supplies the following Volvo bucket tooth/tooth tip/tooth point for Volvo excavators, loaders and bulldozer & motor grader rippers. VOLVO EC950 Mining Rock Bucket Tip 14727597RC  K9003877/952-36001A/14678993 14678993RC/2713-9051RC 14678993 4190001830 26180003001 26180003041 14659025 4190001802 26180022211 26180022201 1452-7863 14680534 14539941/1171-00041/E161-3027 14680532 4190003539 26180022221 26180022231 1171-01371/1453-0544 EC210RC/1453-0544/1171-01371 14681382 14680533 14400991 1454-0728/1171-01910 1171-01910/1454-0728 14681383 14401008 4190003182 4190003183 1455-3243 /T55GP 1455-3243RC 1455-3243 TL 1455-3243 TL 1455-3243RCK 14666168 14664587 14666169 4190003542 4190003543 1455-3244/1453-7843 14681940 14681939 14626742 14727578 14727579 14727597 1070-23200 1070-05031 1171-00480 8240-00450 LX25 Besides bucket tooth/tooth tip/tooth point, We also provide Volvo tooth lock pins, segments/protectors and adapters for for Volvo excavators, loaders, bulldozer & motor grader rippers. If any interest in Volvo bucket tooth/tooth tip/tooth points, tooth lock pins, segments/protectors and adapters, please inquire for more details. VO360TL EC360 Excavator Tiger Long VOLVO Bucket Teeth
What kind of steel is used as raw material for bucket tooth?
It is cast or forged? (Forging is much better than casting. Because the density of the forging process is high.So the teeth are not only high hardness and wear resistance, but the price of the bucket teeth is slightly higher. At present, it is better to use alloy steel as the raw material for the forging technology. VOLVO VO360RC, EC360RC, 14553243RC Forged Rock Bucket Teeth
The same type of two different process bucket teeth, there is a difference in appearance. Because the forging density is high, so the forged bucket tooth will also be heavy.By using a hacksaw to cut the bucket teeth, it is obvious that there are different hardness. 10120547 EC140 Replaceable VOLVO Parts Bucket Tooth
Bucket Teeth Material: Low alloy steel is the main raw material for bucket teeth in casting.Its main elements C, Si, Mn, Cr, Al, ect.　In our foundry, we can add some micro elements, like Mo, Ni to improve the wear resistance to get better working performance.Below is the bucket teeth chemical composition and mechanical properties.
Both the design and fitment of the bucket teeth is very important to their lifespan, performance and application.
